linux-kernel - Re: [PATCH RFC 1/8] media: qcom: camss: csiphy-3ph: Add Gen2 v1.1 MIPI CSI-2 CPHY init

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <df209178-2871-4317-bfb6-d6605fb9f19b@linaro.org>
Date: Mon, 10 Nov 2025 22:23:52 +0200
From: Vladimir Zapolskiy <vladimir.zapolskiy@...aro.org>
To: david@...t.cz, Robert Foss <rfoss@...nel.org>,
 Todor Tomov <todor.too@...il.com>,
 Bryan O'Donoghue <bryan.odonoghue@...aro.org>,
 Mauro Carvalho Chehab <mchehab@...nel.org>,
 Luca Weiss <luca.weiss@...rphone.com>, Petr Hodina <phodina@...tonmail.com>,
 Casey Connolly <casey.connolly@...aro.org>, "Dr. Git" <drgitx@...il.com>
Cc: Joel Selvaraj <foss@...lselvaraj.com>, linux-media@...r.kernel.org,
 linux-arm-msm@...r.kernel.org, linux-kernel@...r.kernel.org,
 phone-devel@...r.kernel.org
Subject: Re: [PATCH RFC 1/8] media: qcom: camss: csiphy-3ph: Add Gen2 v1.1
 MIPI CSI-2 CPHY init

On 11/9/25 11:39, David Heidelberg via B4 Relay wrote:
> From: Casey Connolly <casey.connolly@...aro.org>
> 
> Add a PHY configuration sequence for the sdm845 which uses a Qualcomm
> Gen 2 version 1.1 CSI-2 PHY.
> 
> The PHY can be configured as two phase or three phase in C-PHY or D-PHY
> mode. This configuration supports three-phase C-PHY mode.
> 
> Signed-off-by: Casey Connolly <casey.connolly@...aro.org>
> Signed-off-by: David Heidelberg <david@...t.cz>
> ---
>   .../platform/qcom/camss/camss-csiphy-3ph-1-0.c     | 64 ++++++++++++++++++++++
>   1 file changed, 64 insertions(+)
> 
> diff --git a/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c b/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
> index 619abbf607813..f28c32d1a4ec5 100644
> --- a/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
> +++ b/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
> @@ -144,6 +144,7 @@ csiphy_lane_regs lane_regs_sa8775p[] = {
>   };
>   
>   /* GEN2 1.0 2PH */
> +/* 5 entries: clock + 4 lanes */
>   static const struct
>   csiphy_lane_regs lane_regs_sdm845[] = {
>   	{0x0004, 0x0C, 0x00, CSIPHY_DEFAULT_PARAMS},
> @@ -218,6 +219,69 @@ csiphy_lane_regs lane_regs_sdm845[] = {
>   	{0x0664, 0x7F, 0x00, CSIPHY_DEFAULT_PARAMS},
>   };
>   
> +/* GEN2 1.0 3PH */
> +/* 3 entries: 3 lanes (C-PHY) */
> +static const struct
> +csiphy_lane_regs lane_regs_sdm845_3ph[] = {
> +	{0x015C, 0x43, 0x00, CSIPHY_DEFAULT_PARAMS},
> +	{0x0168, 0xA0, 0x00, CSIPHY_DEFAULT_PARAMS},
> +	{0x016C, 0x25, 0x00, CSIPHY_DEFAULT_PARAMS},
> +	{0x0104, 0x06, 0x00, CSIPHY_DEFAULT_PARAMS},
> +	{0x010C, 0x12, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE},
> +	{0x0108, 0x00, 0x00, CSIPHY_SETTLE_CNT_HIGHER_BYTE},
> +	{0x0114, 0x20, 0x00, CSIPHY_DEFAULT_PARAMS},
> +	{0x0150, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
> +	{0x0118, 0x3e, 0x00, CSIPHY_DEFAULT_PARAMS},
> +	{0x011C, 0x41, 0x00, CSIPHY_DEFAULT_PARAMS},
> +	{0x0120, 0x41, 0x00, CSIPHY_DEFAULT_PARAMS},
> +	{0x0124, 0x7F, 0x00, CSIPHY_DEFAULT_PARAMS},
> +	{0x0128, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
> +	{0x012C, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
> +	{0x0144, 0x12, 0x00, CSIPHY_DEFAULT_PARAMS},
> +	{0x0160, 0x02, 0x00, CSIPHY_DEFAULT_PARAMS},
> +	{0x01CC, 0x41, 0x00, CSIPHY_DEFAULT_PARAMS},
> +	{0x0164, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
> +	{0x01DC, 0x51, 0x00, CSIPHY_DEFAULT_PARAMS},
> +	{0x035C, 0x43, 0x00, CSIPHY_DEFAULT_PARAMS},
> +	{0x0368, 0xA0, 0x00, CSIPHY_DEFAULT_PARAMS},
> +	{0x036C, 0x25, 0x00, CSIPHY_DEFAULT_PARAMS},
> +	{0x0304, 0x06, 0x00, CSIPHY_DEFAULT_PARAMS},
> +	{0x030C, 0x12, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE},
> +	{0x0308, 0x00, 0x00, CSIPHY_SETTLE_CNT_HIGHER_BYTE},
> +	{0x0314, 0x20, 0x00, CSIPHY_DEFAULT_PARAMS},
> +	{0x0350, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
> +	{0x0318, 0x3e, 0x00, CSIPHY_DEFAULT_PARAMS},
> +	{0x031C, 0x41, 0x00, CSIPHY_DEFAULT_PARAMS},
> +	{0x0320, 0x41, 0x00, CSIPHY_DEFAULT_PARAMS},
> +	{0x0324, 0x7F, 0x00, CSIPHY_DEFAULT_PARAMS},
> +	{0x0328, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
> +	{0x032C, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
> +	{0x0344, 0x12, 0x00, CSIPHY_DEFAULT_PARAMS},
> +	{0x0360, 0x02, 0x00, CSIPHY_DEFAULT_PARAMS},
> +	{0x03CC, 0x41, 0x00, CSIPHY_DEFAULT_PARAMS},
> +	{0x0364, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
> +	{0x03DC, 0x51, 0x00, CSIPHY_DEFAULT_PARAMS},
> +	{0x055C, 0x43, 0x00, CSIPHY_DEFAULT_PARAMS},

You may find it be more structured, if the array is split between
0x01zz, 0x03zz and 0x05zz blocks by new lines, each of those three
blocks is a configuration of one of three lanes in total.

> +	{0x0568, 0xA0, 0x00, CSIPHY_DEFAULT_PARAMS},
> +	{0x056C, 0x25, 0x00, CSIPHY_DEFAULT_PARAMS},
> +	{0x0504, 0x06, 0x00, CSIPHY_DEFAULT_PARAMS},
> +	{0x050C, 0x12, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE},
> +	{0x0508, 0x00, 0x00, CSIPHY_SETTLE_CNT_HIGHER_BYTE},
> +	{0x0514, 0x20, 0x00, CSIPHY_DEFAULT_PARAMS},
> +	{0x0550, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
> +	{0x0518, 0x3e, 0x00, CSIPHY_DEFAULT_PARAMS},
> +	{0x051C, 0x41, 0x00, CSIPHY_DEFAULT_PARAMS},
> +	{0x0520, 0x41, 0x00, CSIPHY_DEFAULT_PARAMS},
> +	{0x0524, 0x7F, 0x00, CSIPHY_DEFAULT_PARAMS},
> +	{0x0528, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
> +	{0x052C, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
> +	{0x0544, 0x12, 0x00, CSIPHY_DEFAULT_PARAMS},
> +	{0x0560, 0x02, 0x00, CSIPHY_DEFAULT_PARAMS},
> +	{0x05CC, 0x41, 0x00, CSIPHY_DEFAULT_PARAMS},
> +	{0x0564, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
> +	{0x05DC, 0x51, 0x00, CSIPHY_DEFAULT_PARAMS},
> +};
> +
>   /* GEN2 1.1 2PH */
>   static const struct
>   csiphy_lane_regs lane_regs_sc8280xp[] = {
> 

Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@...aro.org>

-- 
Best wishes,
Vladimir