| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20251113055148.2729943-1-wei.zhang@oss.qualcomm.com>
Date: Wed, 12 Nov 2025 21:51:47 -0800
From: Wei Zhang <wei.zhang@....qualcomm.com>
To: Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, quic_miaoqing@...cinc.com,
quic_zhichen@...cinc.com, Wei Zhang <wei.zhang@....qualcomm.com>
Subject: [PATCH v5] arm64: dts: qcom: qcs8300-ride: enable WLAN on qcs8300-ride
Enable WLAN on qcs8300-ride by adding a node for the PMU module
of the WCN6855 and assigning its LDO power outputs to the existing
WiFi module.
On the qcs8300-ride platform, the corresponding firmware and BDF
are QCA6698AQ instead of WCN6855, which have been added in the
20250211 release.
Signed-off-by: Wei Zhang <wei.zhang@....qualcomm.com>
---
This patch depends on:
- PCIe
https://lore.kernel.org/all/20251024095609.48096-1-ziyue.zhang@oss.qualcomm.com/
Changes in v5:
- rebase patches
- Flip the order of property-n and property-names (Konrad)
- flip the order of bias and output property (Konrad)
- Link to v4: https://lore.kernel.org/all/20250325075331.1662306-1-quic_stonez@quicinc.com/
Changes in v4:
- Rename the symbol pcieport0 to pcie0_port0 (Konrad)
- Adjust the property order in node pcie0_port0 (Konrad)
- Add to the commit message mentioning FW and BDF used by QCS8300 (Dmitry)
- Specify the calibration data using the correct variant (Dmitry)
- Link to v3: https://lore.kernel.org/all/20250318093350.2682132-1-quic_stonez@quicinc.com/
Changes in v3:
- Complete the nodes property definitions according to DTS binding requirements (Bjorn)
- Link to v2: https://lore.kernel.org/all/20250227065439.1407230-1-quic_stonez@quicinc.com/
Changes in v2:
- Rename the nodes name according to DTS coding style (Konrad & Krzysztof)
- Provide regulator-min/max-microvolt to the regulators (Konrad)
- Link to v1: https://lore.kernel.org/all/20250210062910.3618336-1-quic_stonez@quicinc.com/
---
arch/arm64/boot/dts/qcom/qcs8300-ride.dts | 108 ++++++++++++++++++++++
1 file changed, 108 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
index 1215f21e67f1..cd8800a59700 100644
--- a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
+++ b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
@@ -33,6 +33,88 @@ regulator-usb2-vbus {
enable-active-high;
regulator-always-on;
};
+
+ vreg_conn_1p8: vreg-conn-1p8 {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg_conn_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ startup-delay-us = <4000>;
+ enable-active-high;
+ gpio = <&pmm8650au_1_gpios 4 GPIO_ACTIVE_HIGH>;
+ };
+
+ vreg_conn_pa: vreg-conn-pa {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg_conn_pa";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ startup-delay-us = <4000>;
+ enable-active-high;
+ gpio = <&pmm8650au_1_gpios 6 GPIO_ACTIVE_HIGH>;
+ };
+
+ wcn6855-pmu {
+ compatible = "qcom,wcn6855-pmu";
+
+ pinctrl-0 = <&wlan_en_state>;
+ pinctrl-names = "default";
+
+ vddio-supply = <&vreg_conn_pa>;
+ vddaon-supply = <&vreg_conn_1p8>;
+ vddpmu-supply = <&vreg_conn_pa>;
+ vddpmumx-supply = <&vreg_conn_1p8>;
+ vddpmucx-supply = <&vreg_conn_pa>;
+ vddrfa0p95-supply = <&vreg_conn_1p8>;
+ vddrfa1p3-supply = <&vreg_conn_pa>;
+ vddrfa1p9-supply = <&vreg_conn_1p8>;
+ vddpcie1p3-supply = <&vreg_conn_pa>;
+ vddpcie1p9-supply = <&vreg_conn_1p8>;
+
+ wlan-enable-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+
+ regulators {
+ vreg_pmu_rfa_cmn: ldo0 {
+ regulator-name = "vreg_pmu_rfa_cmn";
+ };
+
+ vreg_pmu_aon_0p59: ldo1 {
+ regulator-name = "vreg_pmu_aon_0p59";
+ };
+
+ vreg_pmu_wlcx_0p8: ldo2 {
+ regulator-name = "vreg_pmu_wlcx_0p8";
+ };
+
+ vreg_pmu_wlmx_0p85: ldo3 {
+ regulator-name = "vreg_pmu_wlmx_0p85";
+ };
+
+ vreg_pmu_btcmx_0p85: ldo4 {
+ regulator-name = "vreg_pmu_btcmx_0p85";
+ };
+
+ vreg_pmu_rfa_0p8: ldo5 {
+ regulator-name = "vreg_pmu_rfa_0p8";
+ };
+
+ vreg_pmu_rfa_1p2: ldo6 {
+ regulator-name = "vreg_pmu_rfa_1p2";
+ };
+
+ vreg_pmu_rfa_1p7: ldo7 {
+ regulator-name = "vreg_pmu_rfa_1p7";
+ };
+
+ vreg_pmu_pcie_0p9: ldo8 {
+ regulator-name = "vreg_pmu_pcie_0p9";
+ };
+
+ vreg_pmu_pcie_1p8: ldo9 {
+ regulator-name = "vreg_pmu_pcie_1p8";
+ };
+ };
+ };
};
&apps_rsc {
@@ -355,6 +437,25 @@ &pcie1_phy {
status = "okay";
};
+&pcieport0 {
+ wifi@0 {
+ compatible = "pci17cb,1103";
+ reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+ vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+ vddaon-supply = <&vreg_pmu_aon_0p59>;
+ vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+ vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+ vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+ vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+ vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>;
+ vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+ vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+
+ qcom,calibration-variant = "QC_QCS8300_Ride";
+ };
+};
+
&qupv3_id_0 {
status = "okay";
};
@@ -461,6 +562,13 @@ perst-pins {
bias-pull-down;
};
};
+
+ wlan_en_state: wlan-en-state {
+ pins = "gpio54";
+ function = "gpio";
+ bias-pull-up;
+ output-low;
+ };
};
&uart7 {
base-commit: 6fa9041b7177f6771817b95e83f6df17b147c8c6
prerequisite-patch-id: 0c5a6e979d4ceb5b8c4a81e398dca96b8932441e
prerequisite-patch-id: babbcf9dd8722e19d91b01eb45756f58e58ba6ac
prerequisite-patch-id: e641f09d4139ac77c34757bd08af2db746de3963
prerequisite-patch-id: f5dd3ee9979e2a049badfb51cfab184da4501870
prerequisite-patch-id: 40187dae2c9518a10866104b9fcd5a481ac67d51
--
2.34.1
Powered by blists - more mailing lists