[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <aVNG0BjbEVHhgNCa@dragon>
Date: Tue, 30 Dec 2025 11:28:16 +0800
From: Shawn Guo <shawnguo@...nel.org>
To: Richard Zhu <hongxing.zhu@....com>
Cc: robh@...nel.org, krzk+dt@...nel.org, conor+dt@...nel.org,
bhelgaas@...gle.com, frank.li@....com, l.stach@...gutronix.de,
lpieralisi@...nel.org, kwilczynski@...nel.org, mani@...nel.org,
s.hauer@...gutronix.de, kernel@...gutronix.de, festevam@...il.com,
linux-pci@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
devicetree@...r.kernel.org, imx@...ts.linux.dev,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v10 4/4] arm64: dt: imx95: Add the missed ref clock for
PCIe[0,1]
On Thu, Dec 11, 2025 at 02:48:21PM +0800, Richard Zhu wrote:
> i.MX95 PCIes have two reference clock inputs, one of them is from
> internal PLL. It's wired inside chip and present as "ref" clock. It's
> not an optional clock.
>
> Add the missed ref clock for PCIe[0,1].
>
> Signed-off-by: Richard Zhu <hongxing.zhu@....com>
It doesn't seem to apply to my tree.
Shawn
> ---
> .../boot/dts/freescale/imx95-tqma9596sa-mb-smarc-2.dts | 10 ++++++----
> 1 file changed, 6 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx95-tqma9596sa-mb-smarc-2.dts b/arch/arm64/boot/dts/freescale/imx95-tqma9596sa-mb-smarc-2.dts
> index 5b6b2bb80b288..1258fcb54681e 100644
> --- a/arch/arm64/boot/dts/freescale/imx95-tqma9596sa-mb-smarc-2.dts
> +++ b/arch/arm64/boot/dts/freescale/imx95-tqma9596sa-mb-smarc-2.dts
> @@ -237,8 +237,9 @@ &pcie0 {
> clocks = <&scmi_clk IMX95_CLK_HSIO>,
> <&pcieclk 1>,
> <&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
> - <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
> - clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
> + <&scmi_clk IMX95_CLK_HSIOPCIEAUX>,
> + <&hsio_blk_ctl 0>;
> + clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux", "ref";
> reset-gpio = <&expander2 9 GPIO_ACTIVE_LOW>;
> status = "okay";
> };
> @@ -250,8 +251,9 @@ &pcie1 {
> clocks = <&scmi_clk IMX95_CLK_HSIO>,
> <&pcieclk 0>,
> <&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
> - <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
> - clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
> + <&scmi_clk IMX95_CLK_HSIOPCIEAUX>,
> + <&hsio_blk_ctl 0>;
> + clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux", "ref";
> reset-gpio = <&expander2 10 GPIO_ACTIVE_LOW>;
> status = "okay";
> };
> --
> 2.37.1
>
Powered by blists - more mailing lists