[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <464CF784.70608@garzik.org>
Date: Thu, 17 May 2007 20:47:00 -0400
From: Jeff Garzik <jeff@...zik.org>
To: Auke Kok <auke-jan.h.kok@...el.com>
CC: wenxiong@...ibm.com, e1000-devel@...ts.sourceforge.net,
netdev@...r.kernel.org
Subject: Re: [PATCH] e1000: Work around 82571 completion timout on Pseries
HW
Auke Kok wrote:
> Our 82571 (first PCI-E hardware) causes P-Series hardware to throw
> issues. Disabling PCI-E completion timeouts in our NIC resolves
> the issue.
>
> Signed-off-by: Auke Kok <auke-jan.h.kok@...el.com>
> Cc: Wen Xiong <wenxiong@...ibm.com>
> ---
>
> drivers/net/e1000/e1000_main.c | 10 ++++++++++
> 1 files changed, 10 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
> index 49be393..830d851 100644
> --- a/drivers/net/e1000/e1000_main.c
> +++ b/drivers/net/e1000/e1000_main.c
> @@ -819,6 +819,16 @@ e1000_reset(struct e1000_adapter *adapter)
> E1000_WRITE_REG(&adapter->hw, CTRL, ctrl);
> }
>
> +#if defined(CONFIG_PPC64) || defined(CONFIG_PPC)
> +#define E1000_GCR_DISABLE_TIMEOUT_MECHANISM 0x80000000
> + if (adapter->hw.mac.type == e1000_82571) {
> + /* work around pSeries hardware by disabling timeouts */
> + u32 gcr = E1000_READ_REG(&adapter->hw, E1000_GCR);
> + gcr |= E1000_GCR_DISABLE_TIMEOUT_MECHANISM;
> + E1000_WRITE_REG(&adapter->hw, E1000_GCR, gcr);
> + }
> +#endif
not applied. based on the conversation, it sounds like this is not
specific to PPC
Jeff
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists