[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <200707142217.36361.mb@bu3sch.de>
Date: Sat, 14 Jul 2007 22:17:35 +0200
From: Michael Buesch <mb@...sch.de>
To: "Mike Frysinger" <vapier.adi@...il.com>
Cc: bryan.wu@...log.com, "Jeff Garzik" <jeff@...zik.org>,
LKML <linux-kernel@...r.kernel.org>, netdev@...r.kernel.org,
"Andrew Morton" <akpm@...ux-foundation.org>
Subject: Re: [PATCH 1/3] Blackfin ethernet driver: on chip ethernet MAC controller driver
On Saturday 14 July 2007 21:49:21 Mike Frysinger wrote:
> On 7/14/07, Michael Buesch <mb@...sch.de> wrote:
> > On Saturday 14 July 2007 20:49:53 Bryan Wu wrote:
> > > +static int __init bf537mac_probe(struct net_device *dev)
> > > +{
> > > + struct bf537mac_local *lp = netdev_priv(dev);
> > > + int retval;
> > > +
> > > + /* Grab the MAC address in the MAC */
> > > + *(u32 *) (&(dev->dev_addr[0])) = bfin_read_EMAC_ADDRLO();
> > > + *(u16 *) (&(dev->dev_addr[4])) = (u16) bfin_read_EMAC_ADDRHI();
> >
> > Endianess broken.
> >
> > > +struct dma_config_reg {
> > > + unsigned short b_DMA_EN:1; /* Bit 0 : DMA Enable */
> > > + unsigned short b_WNR:1; /* Bit 1 : DMA Direction */
> > > + unsigned short b_WDSIZE:2; /* Bit 2 & 3 : DMA Tranfer Word size */
> > > + unsigned short b_DMA2D:1; /* Bit 4 : DMA Mode 2D or 1D */
> > > + unsigned short b_RESTART:1; /* Bit 5 : Retain the FIFO */
> > > + unsigned short b_DI_SEL:1; /* Bit 6 : Data Interrupt Timing Select */
> > > + unsigned short b_DI_EN:1; /* Bit 7 : Data Interrupt Enable */
> > > + unsigned short b_NDSIZE:4; /* Bit 8 to 11 : Flex descriptor Size */
> > > + unsigned short b_FLOW:3; /* Bit 12 to 14 : FLOW */
> > > +};
> >
> > This is most likely not endianess safe.
>
> do we really need to care about this ? this is a driver for a MAC
> which can only be found on Blackfin processors and Blackfin itself is
> only little endian.
Well, this bitfield _might_ be OK (although I don't like bitfields
at all), but the above pointer casting stuff should really use
leXX_to_cpu. It's so easy to use and it is easier to read and
maintain the code afterwards.
If the bitfield stays, a comment must be added.
--
Greetings Michael.
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists