| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1384221185-8645-1-git-send-email-r64343@freescale.com>
Date: Tue, 12 Nov 2013 09:53:05 +0800
From: Jason Liu <r64343@...escale.com>
To: <linux-arm-kernel@...ts.infradead.org>
CC: <linville@...driver.com>, <kvalo@....qualcomm.com>,
<linux-wireless@...r.kernel.org>, <netdev@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
Subject: [PATCH] ath6kl: sdio: fix system panic when doing wifi stress test
When did the wifi iperf test, meet one following kernel panic:
command: iperf -c $TARGET_IP -i 5 -t 50 -w 1M
Unable to handle kernel paging request at virtual address 1a480000
pgd = 80004000
[1a480000] *pgd=00000000
Internal error: Oops: 805 [#1] SMP ARM
Modules linked in: ath6kl_sdio ath6kl_core [last unloaded: ath6kl_core]
CPU: 0 PID: 1953 Comm: kworker/u4:0 Not tainted 3.10.9-1.0.0_alpha+dbf364b #1
Workqueue: ath6kl ath6kl_sdio_write_async_work [ath6kl_sdio]
task: dcc9a680 ti: dc9ae000 task.ti: dc9ae000
PC is at v7_dma_clean_range+0x20/0x38
LR is at dma_cache_maint_page+0x50/0x54
pc : [<8001a6f8>] lr : [<800170fc>] psr: 20000093
sp : dc9afcf8 ip : 8001a748 fp : 00000004
r10: 00000000 r9 : 00000001 r8 : 00000000
r7 : 00000001 r6 : 00000000 r5 : 80cb7000 r4 : 03f9a480
r3 : 0000001f r2 : 00000020 r1 : 1a480000 r0 : 1a480000
Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel
Control: 10c53c7d Table: 6cc5004a DAC: 00000015
Process kworker/u4:0 (pid: 1953, stack limit = 0xdc9ae238)
Stack: (0xdc9afcf8 to 0xdc9b0000)
fce0: 80c9b29c 00000000
fd00: 00000000 80017134 8001a748 dc302ac0 00000000 00000000 dc454a00 80c12ed8
fd20: dc115410 80017238 00000000 dc454a10 00000001 80017588 00000001 00000000
fd40: 00000000 dc302ac0 dc9afe38 dc9afe68 00000004 80c12ed8 00000000 dc454a00
fd60: 00000004 80436f88 00000000 00000000 00000600 0000ffff 0000000c 80c113c4
fd80: 80c9b29c 00000001 00000004 dc115470 60000013 dc302ac0 dc46e000 dc302800
fda0: dc9afe10 dc302b78 60000013 dc302ac0 dc46e000 00000035 dc46e5b0 80438c90
fdc0: dc9afe10 dc302800 dc302800 dc9afe68 dc9afe38 80424cb4 00000005 dc9afe10
fde0: dc9afe20 80424de8 dc9afe10 dc302800 dc46e910 80424e90 dc473c00 dc454f00
fe00: 000001b5 7f619d64 dcc7c830 00000000 00000000 dc9afe38 dc9afe68 00000000
fe20: 00000000 00000000 dc9afe28 dc9afe28 80424d80 00000000 00000035 9cac0034
fe40: 00000000 00000000 00000000 00000000 000001b5 00000000 00000000 00000000
fe60: dc9afe68 dc9afe10 3b9aca00 00000000 00000080 00000034 00000000 00000100
fe80: 00000000 00000000 dc9afe10 00000004 dc454a00 00000000 dc46e010 dc46e96c
fea0: dc46e000 dc46e964 00200200 00100100 dc46e910 7f619ec0 00000600 80c0e770
fec0: dc15a900 dcc7c838 00000000 dc46e954 8042d434 dcc44680 dc46e954 dc004400
fee0: dc454500 00000000 00000000 dc9ae038 dc004400 8003c450 dcc44680 dc004414
ff00: dc46e954 dc454500 00000001 dcc44680 dc004414 dcc44698 dc9ae000 dc9ae030
ff20: 00000001 dc9ae000 dc004400 8003d158 8003d020 00000000 00000000 80c53941
ff40: dc9aff64 dcb71ea0 00000000 dcc44680 8003d020 00000000 00000000 00000000
ff60: 00000000 80042480 00000000 00000000 000000f8 dcc44680 00000000 00000000
ff80: dc9aff80 dc9aff80 00000000 00000000 dc9aff90 dc9aff90 dc9affac dcb71ea0
ffa0: 800423cc 00000000 00000000 8000e018 00000000 00000000 00000000 00000000
ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
ffe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[<8001a6f8>] (v7_dma_clean_range+0x20/0x38) from [<800170fc>] (dma_cache_maint_page+0x50/0x54)
[<800170fc>] (dma_cache_maint_page+0x50/0x54) from [<80017134>] (__dma_page_cpu_to_dev+0x34/0x9c)
[<80017134>] (__dma_page_cpu_to_dev+0x34/0x9c) from [<80017238>] (arm_dma_map_page+0x64/0x68)
[<80017238>] (arm_dma_map_page+0x64/0x68) from [<80017588>] (arm_dma_map_sg+0x7c/0xf4)
[<80017588>] (arm_dma_map_sg+0x7c/0xf4) from [<80436f88>] (sdhci_send_command+0x894/0xe00)
[<80436f88>] (sdhci_send_command+0x894/0xe00) from [<80438c90>] (sdhci_request+0xc0/0x1ec)
[<80438c90>] (sdhci_request+0xc0/0x1ec) from [<80424cb4>] (mmc_start_request+0xb8/0xd4)
[<80424cb4>] (mmc_start_request+0xb8/0xd4) from [<80424de8>] (__mmc_start_req+0x60/0x84)
[<80424de8>] (__mmc_start_req+0x60/0x84) from [<80424e90>] (mmc_wait_for_req+0x10/0x20)
[<80424e90>] (mmc_wait_for_req+0x10/0x20) from [<7f619d64>] (ath6kl_sdio_scat_rw.isra.10+0x1dc/0x240 [ath6kl_sdio])
[<7f619d64>] (ath6kl_sdio_scat_rw.isra.10+0x1dc/0x240 [ath6kl_sdio]) from [<7f619ec0>] (ath6kl_sdio_write_async_work+0x5c/0x104 [ath6kl_sdio])
[<7f619ec0>] (ath6kl_sdio_write_async_work+0x5c/0x104 [ath6kl_sdio]) from [<8003c450>] (process_one_work+0x10c/0x370)
[<8003c450>] (process_one_work+0x10c/0x370) from [<8003d158>] (worker_thread+0x138/0x3fc)
[<8003d158>] (worker_thread+0x138/0x3fc) from [<80042480>] (kthread+0xb4/0xb8)
[<80042480>] (kthread+0xb4/0xb8) from [<8000e018>] (ret_from_fork+0x14/0x3c)
Code: e1a02312 e2423001 e1c00003 f57ff04f (ee070f3a)
---[ end trace 0c038f0b8e0b67a3 ]---
Kernel panic - not syncing: Fatal exception
The kernel panic is caused by the sg_buf is not set correctly with the
following code when compiled with Yocto GCC 4.8.1:
drivers/net/wireless/ath/ath6kl/hif.h:
struct hif_scatter_req {
struct list_head list;
/* address for the read/write operation */
u32 addr;
...
/* bounce buffer for upper layers to copy to/from */
u8 *virt_dma_buf;
struct hif_scatter_item scat_list[1];
u32 scat_q_depth;
};
(Note: the scat_req.scat_list[] will dynamiclly grow with run-time)
drivers/net/wireless/ath/ath6kl/sdio.c: ath6kl_sdio_setup_scat_data(...)
/* assemble SG list */
for (i = 0; i < scat_req->scat_entries; i++, sg++) {
ath6kl_dbg(ATH6KL_DBG_SCATTER, "%d: addr:0x%p, len:%d\n",
i, scat_req->scat_list[i].buf,
scat_req->scat_list[i].len);
sg_set_buf(sg, scat_req->scat_list[i].buf,
scat_req->scat_list[i].len);
}
The GCC 4.8.1 compiler will not do the for-loop till scat_entries, instead,
it only run one round loop. This may be caused by that the GCC 4.8.1 thought
that the scat_list only have one item and then no need to do full iteration,
but this is simply wrong by looking at the assebly code. This will cause the
sg buffer not get set when scat_entries > 1 and thus lead to kernel panic.
This patch is a workaround to the GCC 4.8.1 complier issue by passing the
entry address of the scat_req->scat_list to the for-loop and interate it,
then, GCC 4.8.1 will do the full for-loop correctly.
(Note: This issue not observed with GCC 4.7.2, only found on the GCC 4.8.1)
This patch does not change any function logic and no any performance downgrade.
Cc: Kalle Valo <kvalo@....qualcomm.com>
Cc: "John W. Linville" <linville@...driver.com>
Cc: linux-wireless@...r.kernel.org
Cc: netdev@...r.kernel.org
Cc: linux-kernel@...r.kernel.org
Signed-off-by: Jason Liu <r64343@...escale.com>
---
drivers/net/wireless/ath/ath6kl/sdio.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/drivers/net/wireless/ath/ath6kl/sdio.c b/drivers/net/wireless/ath/ath6kl/sdio.c
index 7126bdd..c31df7e 100644
--- a/drivers/net/wireless/ath/ath6kl/sdio.c
+++ b/drivers/net/wireless/ath/ath6kl/sdio.c
@@ -222,6 +222,7 @@ static void ath6kl_sdio_setup_scat_data(struct hif_scatter_req *scat_req,
struct mmc_data *data)
{
struct scatterlist *sg;
+ struct hif_scatter_item *scat_list;
int i;
data->blksz = HIF_MBOX_BLOCK_SIZE;
@@ -240,14 +241,14 @@ static void ath6kl_sdio_setup_scat_data(struct hif_scatter_req *scat_req,
sg = scat_req->sgentries;
sg_init_table(sg, scat_req->scat_entries);
+ scat_list = &scat_req->scat_list[0];
+
/* assemble SG list */
- for (i = 0; i < scat_req->scat_entries; i++, sg++) {
+ for (i = 0; i < scat_req->scat_entries; i++, sg++, scat_list++) {
ath6kl_dbg(ATH6KL_DBG_SCATTER, "%d: addr:0x%p, len:%d\n",
- i, scat_req->scat_list[i].buf,
- scat_req->scat_list[i].len);
+ i, scat_list->buf, scat_list->len);
- sg_set_buf(sg, scat_req->scat_list[i].buf,
- scat_req->scat_list[i].len);
+ sg_set_buf(sg, scat_list->buf, scat_list->len);
}
/* set scatter-gather table for request */
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists