| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <9B4A1B1917080E46B64F07F2989DADD65297BCAC@ORSMSX102.amr.corp.intel.com>
Date: Thu, 10 Apr 2014 14:59:12 +0000
From: "Fujinaka, Todd" <todd.fujinaka@...el.com>
To: Borislav Petkov <bp@...en8.de>,
"e1000-devel@...ts.sourceforge.net"
<e1000-devel@...ts.sourceforge.net>
CC: "netdev@...r.kernel.org" <netdev@...r.kernel.org>,
lkml <linux-kernel@...r.kernel.org>
Subject: RE: [E1000-devel] e1000e 0000:00:19.0 eth0: Hardware Error
We also need to know what part you're using. "lspci | grep Ethernet" should narrow that down.
Thanks.
Todd Fujinaka
Software Application Engineer
Networking Division (ND)
Intel Corporation
todd.fujinaka@...el.com
(503) 712-4565
-----Original Message-----
From: Borislav Petkov [mailto:bp@...en8.de]
Sent: Thursday, April 10, 2014 5:00 AM
To: e1000-devel@...ts.sourceforge.net
Cc: netdev@...r.kernel.org; lkml
Subject: [E1000-devel] e1000e 0000:00:19.0 eth0: Hardware Error
Hi guys,
I started getting those sporadic
[133178.640890] e1000e 0000:00:19.0 eth0: Hardware Error [133179.293148] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [133179.394226] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [133179.397200] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [133181.338258] e1000e 0000:00:19.0 eth0: Hardware Error [133182.077209] pci_pm_runtime_suspend(): e1000_runtime_suspend+0x0/0x40 [e1000e] returns -2
messages with 3.14 and I haven't had them before. After this, I do
rmmod e1000e && modprobe e1000e
and I get:
[133221.891555] e1000e 0000:00:19.0 eth0: removed PHC [133228.181552] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [133228.181562] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[133228.182241] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [133228.182332] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [133229.009837] e1000e: probe of 0000:00:19.0 failed with error -2
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
[133307.107217] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [133307.107228] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[133307.107814] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [133307.107959] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [133307.935921] e1000e: probe of 0000:00:19.0 failed with error -2
...
[133841.361905] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [133841.361914] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[133841.362451] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [133841.362520] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [133842.192710] e1000e: probe of 0000:00:19.0 failed with error -2
each time I try and eth0 is dead. Only a reboot helps, I've come to find out so far.
Any ideas?
--
Regards/Gruss,
Boris.
Sent from a fat crate under my desk. Formatting is fine.
--
------------------------------------------------------------------------------
Put Bad Developers to Shame
Dominate Development with Jenkins Continuous Integration Continuously Automate Build, Test & Deployment Start a new project now. Try Jenkins in the cloud.
http://p.sf.net/sfu/13600_Cloudbees
_______________________________________________
E1000-devel mailing list
E1000-devel@...ts.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/e1000-devel
To learn more about Intel® Ethernet, visit http://communities.intel.com/community/wired
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists