| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <D38E8E86660E514AB505863C19C9287C73F9532B@ORSMSX102.amr.corp.intel.com> Date: Thu, 10 Apr 2014 15:54:40 +0000 From: "Ronciak, John" <john.ronciak@...el.com> To: Borislav Petkov <bp@...en8.de>, "e1000-devel@...ts.sourceforge.net" <e1000-devel@...ts.sourceforge.net> CC: "netdev@...r.kernel.org" <netdev@...r.kernel.org>, lkml <linux-kernel@...r.kernel.org> Subject: RE: [E1000-devel] e1000e 0000:00:19.0 eth0: Hardware Error Boris, What kind of system (platform) is this happening on? It's a LOM correct? Can you run 'lspci -vvv' and output the results? Thanks. Cheers, John > -----Original Message----- > From: Borislav Petkov [mailto:bp@...en8.de] > Sent: Thursday, April 10, 2014 5:00 AM > To: e1000-devel@...ts.sourceforge.net > Cc: netdev@...r.kernel.org; lkml > Subject: [E1000-devel] e1000e 0000:00:19.0 eth0: Hardware Error > > Hi guys, > > I started getting those sporadic > > [133178.640890] e1000e 0000:00:19.0 eth0: Hardware Error > [133179.293148] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X > [133179.394226] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X > [133179.397200] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready > [133181.338258] e1000e 0000:00:19.0 eth0: Hardware Error > [133182.077209] pci_pm_runtime_suspend(): > e1000_runtime_suspend+0x0/0x40 [e1000e] returns -2 > > messages with 3.14 and I haven't had them before. After this, I do > > rmmod e1000e && modprobe e1000e > > and I get: > > [133221.891555] e1000e 0000:00:19.0 eth0: removed PHC [133228.181552] > e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [133228.181562] > e1000e: Copyright(c) 1999 - 2013 Intel Corporation. > [133228.182241] e1000e 0000:00:19.0: Interrupt Throttling Rate > (ints/sec) set to dynamic conservative mode [133228.182332] e1000e > 0000:00:19.0: irq 45 for MSI/MSI-X [133229.009837] e1000e: probe of > 0000:00:19.0 failed with error -2 > ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ > > [133307.107217] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k > [133307.107228] e1000e: Copyright(c) 1999 - 2013 Intel Corporation. > [133307.107814] e1000e 0000:00:19.0: Interrupt Throttling Rate > (ints/sec) set to dynamic conservative mode [133307.107959] e1000e > 0000:00:19.0: irq 45 for MSI/MSI-X [133307.935921] e1000e: probe of > 0000:00:19.0 failed with error -2 > > ... > > [133841.361905] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k > [133841.361914] e1000e: Copyright(c) 1999 - 2013 Intel Corporation. > [133841.362451] e1000e 0000:00:19.0: Interrupt Throttling Rate > (ints/sec) set to dynamic conservative mode [133841.362520] e1000e > 0000:00:19.0: irq 45 for MSI/MSI-X [133842.192710] e1000e: probe of > 0000:00:19.0 failed with error -2 > > each time I try and eth0 is dead. Only a reboot helps, I've come to > find out so far. > > Any ideas? > > -- > Regards/Gruss, > Boris. > > Sent from a fat crate under my desk. Formatting is fine. > -- > > ----------------------------------------------------------------------- > ------- > Put Bad Developers to Shame > Dominate Development with Jenkins Continuous Integration Continuously > Automate Build, Test & Deployment Start a new project now. Try Jenkins > in the cloud. > http://p.sf.net/sfu/13600_Cloudbees > _______________________________________________ > E1000-devel mailing list > E1000-devel@...ts.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/e1000-devel > To learn more about Intel® Ethernet, visit > http://communities.intel.com/community/wired -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists