lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20140410163339.GL29093@pd.tnic>
Date:	Thu, 10 Apr 2014 18:33:39 +0200
From:	Borislav Petkov <bp@...en8.de>
To:	"Ertman, DavidX M" <davidx.m.ertman@...el.com>
Cc:	"Fujinaka, Todd" <todd.fujinaka@...el.com>,
	"e1000-devel@...ts.sourceforge.net" 
	<e1000-devel@...ts.sourceforge.net>,
	"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
	lkml <linux-kernel@...r.kernel.org>,
	"Ronciak, John" <john.ronciak@...el.com>
Subject: Re: [E1000-devel] e1000e 0000:00:19.0 eth0: Hardware Error

Hi guys,

let me answer to all of you here:

On Thu, Apr 10, 2014 at 03:45:41PM +0000, Ertman, DavidX M wrote:
> Could you also provide some information about the configuration
> of the system when this happens?

AFAIR, this happens when I stick the network cable in. I'll pay
attention to the exact moment when this happens in the future and report
back.

> Do you have Runtime Power Management configured
> in the kernel and enabled? (echo auto >
> /sys/devices/pci0000\:00/0000\:00\:19.0/power/control)

Yes. I normally run powertop when the machine goes up after a reboot and
set all tunables to "Good". The above is one of them.

> Is the network cable in and link is up?

Yes, as I mentioned, there is a very high chance that it happens when I
plug in the network cable. But I'll need to confirm that.

> Is anything happening to the link partner (going up and down,
> connecting and disconnecting)?

Not that I know of - the partner is a 8-port switch where other machines
are connected. Their connection is fine AFAICT.

> We also need to know what part you're using. "lspci | grep Ethernet"
> should narrow that down.

> What kind of system (platform) is this happening on? It's a LOM
> correct? Can you run 'lspci -vvv' and output the results?

Machine is Thinkpad x230, I'm attaching full lspci -vvv -xxxx output
with PCI config space dump, hth.

Thanks guys.

-- 
Regards/Gruss,
    Boris.

Sent from a fat crate under my desk. Formatting is fine.
--

Download attachment "lspci.gz" of type "application/octet-stream" (8199 bytes)

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ