netdev - Re: stmmac still supporting spear600 ?

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <63405ec5-099c-b935-2724-6c85012fc9f7@st.com>
Date:   Thu, 23 Mar 2017 11:33:23 +0100
From:   Giuseppe CAVALLARO <peppe.cavallaro@...com>
To:     Thomas Petazzoni <thomas.petazzoni@...e-electrons.com>
CC:     Alexandre Torgue <alexandre.torgue@...com>,
        <netdev@...r.kernel.org>, Viresh Kumar <vireshk@...nel.org>,
        Shiraz Hashim <shiraz.linux.kernel@...il.com>,
        <linux-arm-kernel@...ts.infradead.org>
Subject: Re: stmmac still supporting spear600 ?

Hello Thomas

On 3/21/2017 3:50 PM, Thomas Petazzoni wrote:
> Hello,
>
> On Thu, 9 Mar 2017 15:56:31 +0100, Giuseppe CAVALLARO wrote:
>
>> On 3/9/2017 10:32 AM, Thomas Petazzoni wrote:
>>
>>> OK, I'll have a look. However, I'm still confused by this DMA_RESET bit
>>> that never clears, contrary to what the datasheet says. Are there some
>>> erratas?
>> I suggest you to take a look at the tx/rx clocks from PHY.
>> You have to provide these otherwise you cannot reset the engine.
> Thanks for the hint.

you are welcome

> Further research has revealed that everything is working fine on a
> platform with a Gigabit PHY connected via GMII.
>
> However, on a different platform (which I'm using) with a 10/100 PHY
> connected via MII, DMA_RESET never clears, and networking doesn't work.
> The SMSC PHY LAN8700 is also supposed to be providing the clock through
> its TX_CLK pin. I double checked, and both the MAC and PHY are in MII
> mode, but still no luck so far.
>
> Of course, if you have any suggestion or hint, I'm all ears :)

I can just you to keep the focus on clock configuration. I tested the 
SMSC PHY LAN8700
w/o any issues on several platform.  In MII both rx/tx_clk are provided 
by PHY and if you
have an external oscillator this should be safe enough, indeed.
Another check you can do is about the reset time! Maybe you need to 
change something
when reset the SMSC transceiver, try to increase the delay (if you use 
GPIO to reset it).

Regards
Peppe

>
> Thanks,
>
> Thomas