netdev - Re: [PATCH V3] net: phy: tja11xx: Add TJA11xx PHY driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1731fce4-21c3-aa03-953e-ab4610479431@denx.de>
Date:   Fri, 4 Jan 2019 03:53:08 +0100
From:   Marek Vasut <marex@...x.de>
To:     Heiner Kallweit <hkallweit1@...il.com>, netdev@...r.kernel.org
Cc:     Andrew Lunn <andrew@...n.ch>,
        Florian Fainelli <f.fainelli@...il.com>
Subject: Re: [PATCH V3] net: phy: tja11xx: Add TJA11xx PHY driver

On 1/4/19 3:19 AM, Marek Vasut wrote:

[...]

On a separate note, I was pondering about the master/slave mode of the
TJA11xx PHY. Right now, the driver only operates in Automatic mode,
however the PHY can be force-configured as either master or slave.
Would using .set_tunable with a new tunable type be a good way to expose
this to userspace ? The ethtool can then configure the PHY mode.

-- 
Best regards,
Marek Vasut