netdev - Re: [PATCH 10/19] usbnet: smsc95xx: Replace smsc95xx_mdio_read() with phy

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <65fa6691-eafb-d8ba-c7f9-28f7cf19396b@denx.de>
Date:   Fri, 4 Jan 2019 03:19:01 +0100
From:   Marek Vasut <marex@...x.de>
To:     Andrew Lunn <andrew@...n.ch>
Cc:     netdev@...r.kernel.org, "David S . Miller" <davem@...emloft.net>,
        Nisar Sayed <Nisar.Sayed@...rochip.com>,
        Woojung Huh <Woojung.Huh@...rochip.com>,
        Florian Fainelli <f.fainelli@...il.com>,
        linux-usb@...r.kernel.org
Subject: Re: [PATCH 10/19] usbnet: smsc95xx: Replace smsc95xx_mdio_read() with
 phy_read()

On 1/3/19 2:39 PM, Andrew Lunn wrote:
>>  static int get_mdix_status(struct net_device *net)
>>  {
>>  	struct usbnet *dev = netdev_priv(net);
>> +	struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
>>  	u32 val;
>>  	int buf;
>>  
>> -	buf = smsc95xx_mdio_read(dev->net, dev->mii.phy_id, SPECIAL_CTRL_STS);
>> +	buf = phy_read(pdata->phydev, SPECIAL_CTRL_STS);
>>  	if (buf & SPECIAL_CTRL_STS_OVRRD_AMDIX_) {
>>  		if (buf & SPECIAL_CTRL_STS_AMDIX_ENABLE_)
>>  			return ETH_TP_MDI_AUTO;
>> @@ -793,7 +794,7 @@ static void set_mdix_status(struct net_device *net, __u8 mdix_ctrl)
>>  	    (pdata->chip_id == ID_REV_CHIP_ID_89530_) ||
>>  	    (pdata->chip_id == ID_REV_CHIP_ID_9730_)) {
>>  		/* Extend Manual AutoMDIX timer for 9500A/9500Ai */
>> -		buf = smsc95xx_mdio_read(dev->net, dev->mii.phy_id,
>> +		buf = phy_read(pdata->phydev,
>>  					 PHY_EDPD_CONFIG);
>>  		buf |= PHY_EDPD_CONFIG_EXT_CROSSOVER_;
>>  		smsc95xx_mdio_write(dev->net, dev->mii.phy_id,
>> @@ -801,7 +802,7 @@ static void set_mdix_status(struct net_device *net, __u8 mdix_ctrl)
>>  	}
>>  
>>  	if (mdix_ctrl == ETH_TP_MDI) {
>> -		buf = smsc95xx_mdio_read(dev->net, dev->mii.phy_id,
>> +		buf = phy_read(pdata->phydev,
>>  					 SPECIAL_CTRL_STS);
>>  		buf |= SPECIAL_CTRL_STS_OVRRD_AMDIX_;
>>  		buf &= ~(SPECIAL_CTRL_STS_AMDIX_ENABLE_ |
>> @@ -809,7 +810,7 @@ static void set_mdix_status(struct net_device *net, __u8 mdix_ctrl)
>>  		smsc95xx_mdio_write(dev->net, dev->mii.phy_id,
>>  				    SPECIAL_CTRL_STS, buf);
>>  	} else if (mdix_ctrl == ETH_TP_MDI_X) {
>> -		buf = smsc95xx_mdio_read(dev->net, dev->mii.phy_id,
>> +		buf = phy_read(pdata->phydev,
>>  					 SPECIAL_CTRL_STS);
>>  		buf |= SPECIAL_CTRL_STS_OVRRD_AMDIX_;
>>  		buf &= ~(SPECIAL_CTRL_STS_AMDIX_ENABLE_ |
>> @@ -818,7 +819,7 @@ static void set_mdix_status(struct net_device *net, __u8 mdix_ctrl)
>>  		smsc95xx_mdio_write(dev->net, dev->mii.phy_id,
>>  				    SPECIAL_CTRL_STS, buf);
>>  	} else if (mdix_ctrl == ETH_TP_MDI_AUTO) {
>> -		buf = smsc95xx_mdio_read(dev->net, dev->mii.phy_id,
>> +		buf = phy_read(pdata->phydev,
>>  					 SPECIAL_CTRL_STS);
>>  		buf &= ~SPECIAL_CTRL_STS_OVRRD_AMDIX_;
>>  		buf &= ~(SPECIAL_CTRL_STS_AMDIX_ENABLE_ |
>> @@ -968,6 +969,7 @@ static void smsc95xx_adjust_link(struct net_device *netdev)
>  
> All this crossover code should be moved into the PHY driver.

Fine, this can be done in a subsequent patch though, right ? I'd like to
keep the changes small, so if something breaks, it could be bisected easily.

-- 
Best regards,
Marek Vasut