| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 5 Feb 2019 12:37:14 -0600
From: Li Yang <leoyang.li@....com>
To: Pankaj Bansal <pankaj.bansal@....com>
Cc: Shawn Guo <shawnguo@...nel.org>, Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>,
"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH v2] arm64: dts: lx2160aqds: Add mdio mux nodes
On Mon, Feb 4, 2019 at 2:53 AM Pankaj Bansal <pankaj.bansal@....com> wrote:
>
> The two external MDIO buses used to communicate with phy devices that are
> external to SOC are muxed in LX2160AQDS board.
>
> These buses can be routed to any one of the eight IO slots on LX2160AQDS
> board depending on value in fpga register 0x54.
>
> Additionally the external MDIO1 is used to communicate to the onboard
> RGMII phy devices.
>
> The mdio1 is controlled by bits 4-7 of fpga register and mdio2 is
> controlled by bits 0-3 of fpga register.
>
> Signed-off-by: Pankaj Bansal <pankaj.bansal@....com>
> ---
>
> Notes:
> V2:
> - removed unnecassary TODO statements
> - removed device_type from mdio nodes
> - change the case of hex number to lowercase
> - removed board specific comments from soc file
There are still some comments from V1 haven't been addressed.
>
> .../boot/dts/freescale/fsl-lx2160a-qds.dts | 115 +++++++++++++++++
> .../boot/dts/freescale/fsl-lx2160a.dtsi | 18 +++
> 2 files changed, 133 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
> index 99a22abbe725..2c3020a72d41 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
> @@ -46,6 +46,121 @@
> &i2c0 {
> status = "okay";
>
> + fpga@66 {
> + compatible = "fsl,lx2160aqds-fpga", "fsl,fpga-qixis-i2c";
> + reg = <0x66>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + mdio-mux-1@54 {
Still no compatible string defined for the node. Probably should be
"mdio-mux-mmioreg", "mdio-mux"
> + mdio-parent-bus = <&emdio1>;
> + reg = <0x54>; /* BRDCFG4 */
> + mux-mask = <0xf8>; /* EMI1_MDIO */
> + #address-cells=<1>;
> + #size-cells = <0>;
> +
> + mdio@0 {
> + reg = <0x00>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> + mdio@40 {
> + reg = <0x40>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> + mdio@c0 {
> + reg = <0xc0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> + mdio@c8 {
> + reg = <0xc8>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> + mdio@d0 {
> + reg = <0xd0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> + mdio@d8 {
> + reg = <0xd8>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> + mdio@e0 {
> + reg = <0xe0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> + mdio@e8 {
> + reg = <0xe8>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> + mdio@f0 {
> + reg = <0xf0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> + mdio@f8 {
> + reg = <0xf8>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> + };
> +
> + mdio-mux-2@54 {
> + mdio-parent-bus = <&emdio2>;
> + reg = <0x54>; /* BRDCFG4 */
> + mux-mask = <0x07>; /* EMI2_MDIO */
> + #address-cells=<1>;
> + #size-cells = <0>;
> +
> + mdio@0 {
> + reg = <0x00>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> + mdio@1 {
> + reg = <0x01>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> + mdio@2 {
> + reg = <0x02>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> + mdio@3 {
> + reg = <0x03>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> + mdio@4 {
> + reg = <0x04>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> + mdio@5 {
> + reg = <0x05>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> + mdio@6 {
> + reg = <0x06>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> + mdio@7 {
> + reg = <0x07>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> + };
> + };
> +
> i2c-mux@77 {
> compatible = "nxp,pca9547";
> reg = <0x77>;
> diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> index a79f5c1ea56d..a74045ad22ad 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> @@ -762,5 +762,23 @@
> <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
> dma-coherent;
> };
> +
> + /* WRIOP0: 0x8b8_0000, E-MDIO1: 0x1_6000 */
> + emdio1: mdio@...6000 {
> + compatible = "fsl,fman-memac-mdio";
> + reg = <0x0 0x8b96000 0x0 0x1000>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + little-endian; /* force the driver in LE mode */
Still doesn't fully align with the binding at
"Documentation/devicetree/bindings/powerpc/fsl/fman.txt".
It should either have the "interrupts" property for external MDIO or
"fsl,fman-internal-mdio" for internal MDIO.
> + };
> +
> + /* WRIOP0: 0x8b8_0000, E-MDIO2: 0x1_7000 */
> + emdio2: mdio@...7000 {
> + compatible = "fsl,fman-memac-mdio";
> + reg = <0x0 0x8b97000 0x0 0x1000>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + little-endian; /* force the driver in LE mode */
> + };
> };
> };
> --
> 2.17.1
>
Powered by blists - more mailing lists