netdev - Re: [PATCH v2 1/3] net: phy: mdio: add IPQ40xx MDIO driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Wed, 15 Apr 2020 10:33:34 +0100
From:   Russell King - ARM Linux admin <linux@...linux.org.uk>
To:     Robert Marko <robert.marko@...tura.hr>
Cc:     andrew@...n.ch, f.fainelli@...il.com, hkallweit1@...il.com,
        linux-kernel@...r.kernel.org, netdev@...r.kernel.org,
        agross@...nel.org, bjorn.andersson@...aro.org, robh+dt@...nel.org,
        mark.rutland@....com, linux-arm-msm@...r.kernel.org,
        devicetree@...r.kernel.org,
        Christian Lamparter <chunkeey@...il.com>,
        Luka Perkov <luka.perkov@...tura.hr>
Subject: Re: [PATCH v2 1/3] net: phy: mdio: add IPQ40xx MDIO driver

On Tue, Apr 14, 2020 at 08:10:11PM +0200, Robert Marko wrote:
> diff --git a/drivers/net/phy/mdio-ipq40xx.c b/drivers/net/phy/mdio-ipq40xx.c
> new file mode 100644
> index 000000000000..d8c11c621f20
> --- /dev/null
> +++ b/drivers/net/phy/mdio-ipq40xx.c
> @@ -0,0 +1,176 @@
> +// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
> +/* Copyright (c) 2015, The Linux Foundation. All rights reserved. */
> +/* Copyright (c) 2020 Sartura Ltd. */
> +
> +#include <linux/delay.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/io.h>
> +#include <linux/of_address.h>
> +#include <linux/of_mdio.h>
> +#include <linux/phy.h>
> +#include <linux/platform_device.h>
> +

Looking at how these registers are used, they could be renamed:

> +#define MDIO_CTRL_0_REG		0x40

This seems to be unused.

> +#define MDIO_CTRL_1_REG		0x44

MDIO_ADDR_REG

> +#define MDIO_CTRL_2_REG		0x48

MDIO_DATA_WRITE_REG

> +#define MDIO_CTRL_3_REG		0x4c

MDIO_DATA_READ_REG

> +#define MDIO_CTRL_4_REG		0x50
> +#define MDIO_CTRL_4_ACCESS_BUSY		BIT(16)
> +#define MDIO_CTRL_4_ACCESS_START		BIT(8)
> +#define MDIO_CTRL_4_ACCESS_CODE_READ		0
> +#define MDIO_CTRL_4_ACCESS_CODE_WRITE	1

MDIO_CMD_* ?

> +
> +#define IPQ40XX_MDIO_RETRY	1000
> +#define IPQ40XX_MDIO_DELAY	10
> +
> +struct ipq40xx_mdio_data {
> +	void __iomem	*membase;
> +};
> +
> +static int ipq40xx_mdio_wait_busy(struct mii_bus *bus)
> +{
> +	struct ipq40xx_mdio_data *priv = bus->priv;
> +	int i;
> +
> +	for (i = 0; i < IPQ40XX_MDIO_RETRY; i++) {
> +		unsigned int busy;
> +
> +		busy = readl(priv->membase + MDIO_CTRL_4_REG) &
> +			MDIO_CTRL_4_ACCESS_BUSY;
> +		if (!busy)
> +			return 0;
> +
> +		/* BUSY might take to be cleard by 15~20 times of loop */
> +		udelay(IPQ40XX_MDIO_DELAY);
> +	}
> +
> +	dev_err(bus->parent, "MDIO operation timed out\n");
> +
> +	return -ETIMEDOUT;
> +}
> +
> +static int ipq40xx_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
> +{
> +	struct ipq40xx_mdio_data *priv = bus->priv;
> +	int value = 0;
> +	unsigned int cmd = 0;

No need to initialise either of these, and you can eliminate "value"
which will then satisfy davem's requirement for reverse-christmas-tree
ordering of variable declarations.

> +
> +	/* Reject clause 45 */
> +	if (regnum & MII_ADDR_C45)
> +		return -EOPNOTSUPP;
> +
> +	if (ipq40xx_mdio_wait_busy(bus))
> +		return -ETIMEDOUT;
> +
> +	/* issue the phy address and reg */
> +	writel((mii_id << 8) | regnum, priv->membase + MDIO_CTRL_1_REG);
> +
> +	cmd = MDIO_CTRL_4_ACCESS_START | MDIO_CTRL_4_ACCESS_CODE_READ;
> +
> +	/* issue read command */
> +	writel(cmd, priv->membase + MDIO_CTRL_4_REG);
> +
> +	/* Wait read complete */
> +	if (ipq40xx_mdio_wait_busy(bus))
> +		return -ETIMEDOUT;
> +
> +	/* Read data */
> +	value = readl(priv->membase + MDIO_CTRL_3_REG);
> +
> +	return value;
> +}
> +
> +static int ipq40xx_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
> +							 u16 value)
> +{
> +	struct ipq40xx_mdio_data *priv = bus->priv;
> +	unsigned int cmd = 0;

No need to initialise cmd.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 10.2Mbps down 587kbps up