Message-ID: <CAF=yD-J8rsr9JWdMGBSc-muFGMG2=YCWYwWOiQBQZuryioBUoA@mail.gmail.com>
Date:   Wed, 3 Feb 2021 13:24:08 -0500
From:   Willem de Bruijn <willemdebruijn.kernel@...il.com>
To:     "Michael S. Tsirkin" <mst@...hat.com>
Cc:     Willem de Bruijn <willemb@...gle.com>,
        Wei Wang <weiwan@...gle.com>,
        David Miller <davem@...emloft.net>,
        Linux Kernel Network Developers <netdev@...r.kernel.org>,
        Jakub Kicinski <kuba@...nel.org>,
        virtualization@...ts.linux-foundation.org
Subject: Re: [PATCH net] virtio-net: suppress bad irq warning for tx napi

On Wed, Feb 3, 2021 at 5:42 AM Michael S. Tsirkin <mst@...hat.com> wrote:
>
> On Tue, Feb 02, 2021 at 07:06:53PM -0500, Willem de Bruijn wrote:
> > On Tue, Feb 2, 2021 at 6:53 PM Willem de Bruijn <willemb@...gle.com> wrote:
> > >
> > > On Tue, Feb 2, 2021 at 6:47 PM Wei Wang <weiwan@...gle.com> wrote:
> > > >
> > > > On Tue, Feb 2, 2021 at 3:12 PM Michael S. Tsirkin <mst@...hat.com> wrote:
> > > > >
> > > > > On Thu, Jan 28, 2021 at 04:21:36PM -0800, Wei Wang wrote:
> > > > > > With the implementation of napi-tx in virtio driver, we clean tx
> > > > > > descriptors from rx napi handler, for the purpose of reducing tx
> > > > > > complete interrupts. But this could introduce a race where tx complete
> > > > > > interrupt has been raised, but the handler found there is no work to do
> > > > > > because we have done the work in the previous rx interrupt handler.
> > > > > > This could lead to the following warning msg:
> > > > > > [ 3588.010778] irq 38: nobody cared (try booting with the
> > > > > > "irqpoll" option)
> > > > > > [ 3588.017938] CPU: 4 PID: 0 Comm: swapper/4 Not tainted
> > > > > > 5.3.0-19-generic #20~18.04.2-Ubuntu
> > > > > > [ 3588.017940] Call Trace:
> > > > > > [ 3588.017942]  <IRQ>
> > > > > > [ 3588.017951]  dump_stack+0x63/0x85
> > > > > > [ 3588.017953]  __report_bad_irq+0x35/0xc0
> > > > > > [ 3588.017955]  note_interrupt+0x24b/0x2a0
> > > > > > [ 3588.017956]  handle_irq_event_percpu+0x54/0x80
> > > > > > [ 3588.017957]  handle_irq_event+0x3b/0x60
> > > > > > [ 3588.017958]  handle_edge_irq+0x83/0x1a0
> > > > > > [ 3588.017961]  handle_irq+0x20/0x30
> > > > > > [ 3588.017964]  do_IRQ+0x50/0xe0
> > > > > > [ 3588.017966]  common_interrupt+0xf/0xf
> > > > > > [ 3588.017966]  </IRQ>
> > > > > > [ 3588.017989] handlers:
> > > > > > [ 3588.020374] [<000000001b9f1da8>] vring_interrupt
> > > > > > [ 3588.025099] Disabling IRQ #38
> > > > > >
> > > > > > This patch adds a new param to struct vring_virtqueue, and we set it for
> > > > > > tx virtqueues if napi-tx is enabled, to suppress the warning in such
> > > > > > case.
> > > > > >
> > > > > > Fixes: 7b0411ef4aa6 ("virtio-net: clean tx descriptors from rx napi")
> > > > > > Reported-by: Rick Jones <jonesrick@...gle.com>
> > > > > > Signed-off-by: Wei Wang <weiwan@...gle.com>
> > > > > > Signed-off-by: Willem de Bruijn <willemb@...gle.com>
> > > > >
> > > > >
> > > > > This description does not make sense to me.
> > > > >
> > > > > irq X: nobody cared
> > > > > only triggers after an interrupt is unhandled repeatedly.
> > > > >
> > > > > So something causes a storm of useless tx interrupts here.
> > > > >
> > > > > Let's find out what it was please. What you are doing is
> > > > > just preventing linux from complaining.
> > > >
> > > > The traffic that causes this warning is a netperf tcp_stream with at
> > > > least 128 flows between 2 hosts. And the warning gets triggered on the
> > > > receiving host, which has a lot of rx interrupts firing on all queues,
> > > > and a few tx interrupts.
> > > > And I think the scenario is: when the tx interrupt gets fired, it gets
> > > > coalesced with the rx interrupt. Basically, the rx and tx interrupts
> > > > get triggered very close to each other, and gets handled in one round
> > > > of do_IRQ(). And the rx irq handler gets called first, which calls
> > > > virtnet_poll(). However, virtnet_poll() calls virtnet_poll_cleantx()
> > > > to try to do the work on the corresponding tx queue as well. That's
> > > > why when tx interrupt handler gets called, it sees no work to do.
> > > > And the reason for the rx handler to handle the tx work is here:
> > > > https://lists.linuxfoundation.org/pipermail/virtualization/2017-April/034740.html
> > >
> > > Indeed. It's not a storm necessarily. The warning occurs after one
> > > hundred such events, since boot, which is a small number compared real
> > > interrupt load.
> >
> > Sorry, this is wrong. It is the other call to __report_bad_irq from
> > note_interrupt that applies here.
> >
> > > Occasionally seeing an interrupt with no work is expected after
> > > 7b0411ef4aa6 ("virtio-net: clean tx descriptors from rx napi"). As
> > > long as this rate of events is very low compared to useful interrupts,
> > > and total interrupt count is greatly reduced vs not having work
> > > stealing, it is a net win.
>
> Right, but if 99900 out of 100000 interrupts were wasted, then it is
> surely an even greater win to disable interrupts while polling like
> this.  Might be tricky to detect, disabling/enabling aggressively every
> time even if there's nothing in the queue is sure to cause lots of cache
> line bounces, and we don't want to enable callbacks if they were not
> enabled e.g. by start_xmit ...  Some kind of counter?

Yes. It was known that the work stealing is more effective in some
workloads than others. But a 99% spurious rate I had not anticipated.

Most interesting is the number of interrupts suppressed as a result of
the feature. That is not captured by this statistic.

In any case, we'll take a step back to better understand behavior. And
especially why this high spurious rate exhibits in this workload with
many concurrent flows.

Powered by blists - more mailing lists