[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <DB9PR04MB8106FF32F683295860D4939F886D9@DB9PR04MB8106.eurprd04.prod.outlook.com>
Date: Thu, 18 Aug 2022 01:29:18 +0000
From: Wei Fang <wei.fang@....com>
To: Andrew Lunn <andrew@...n.ch>
CC: "hkallweit1@...il.com" <hkallweit1@...il.com>,
"linux@...linux.org.uk" <linux@...linux.org.uk>,
"davem@...emloft.net" <davem@...emloft.net>,
"edumazet@...gle.com" <edumazet@...gle.com>,
"kuba@...nel.org" <kuba@...nel.org>,
"pabeni@...hat.com" <pabeni@...hat.com>,
"robh+dt@...nel.org" <robh+dt@...nel.org>,
"krzysztof.kozlowski+dt@...aro.org"
<krzysztof.kozlowski+dt@...aro.org>,
"f.fainelli@...il.com" <f.fainelli@...il.com>,
"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: RE: [PATCH net 1/2] dt: ar803x: Document disable-hibernation property
> -----Original Message-----
> From: Andrew Lunn <andrew@...n.ch>
> Sent: 2022年8月18日 9:20
> To: Wei Fang <wei.fang@....com>
> Cc: hkallweit1@...il.com; linux@...linux.org.uk; davem@...emloft.net;
> edumazet@...gle.com; kuba@...nel.org; pabeni@...hat.com;
> robh+dt@...nel.org; krzysztof.kozlowski+dt@...aro.org; f.fainelli@...il.com;
> netdev@...r.kernel.org; devicetree@...r.kernel.org;
> linux-kernel@...r.kernel.org
> Subject: Re: [PATCH net 1/2] dt: ar803x: Document disable-hibernation
> property
>
> > Hi Andrew,
> >
> > Your suggestion is indeed an effective solution, but I checked both
> > the datasheet and the driver of AR803x PHYs and found that the
> > qca,clk-out-frequency and the qca,keep-pll-enabled properties are associated
> with the CLK_25M pin of AR803x PHYs.
> > But there is a case that CLK_25M pin is not used on some platforms.
> > Taking our i.MX8DXL platform as an example, the stmmac and AR8031 PHY
> > are applied on this platform, but the CLK_25M pin of AR8031 is not
> > used. So when I used the method you mentioned above, it did not work
> > as expected. In this case, we can only disable the hibernation mode of
> > AR803x PHYs and keep the RX_CLK always outputting a valid clock so that the
> stmmac can complete the software reset operation.
>
> What happens to the RX_CLK when you unplug the cable? It is no longer
> receiving anything, so i would expect the RX_CLK to stop ticking. Does that
> cause problems for the MAC?
>
Yes, after the PHY enters hibernation mode that the RX_CLK stop ticking, but
for stmmac, it is essential that RX_CLK of PHY is present for software reset
completion. Otherwise, the stmmac is failed to complete the software reset
and can not init DMA.
> Andrew
Powered by blists - more mailing lists