| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230620140741.2468658-1-niravkumar.l.rabara@intel.com>
Date: Tue, 20 Jun 2023 22:07:41 +0800
From: niravkumar.l.rabara@...el.com
To: krzysztof.kozlowski@...aro.org
Cc: adrian.ho.yin.ng@...el.com,
andrew@...n.ch,
conor+dt@...nel.org,
devicetree@...r.kernel.org,
dinguyen@...nel.org,
krzysztof.kozlowski+dt@...aro.org,
linux-clk@...r.kernel.org,
linux-kernel@...r.kernel.org,
mturquette@...libre.com,
netdev@...r.kernel.org,
niravkumar.l.rabara@...el.com,
p.zabel@...gutronix.de,
richardcochran@...il.com,
robh+dt@...nel.org,
sboyd@...nel.org,
wen.ping.teh@...el.com
Subject: Re: [PATCH 4/4] arm64: dts: agilex5: Add initial support for Intel's Agilex5 SoCFPGA
>On 18/06/2023 15:22, niravkumar.l.rabara@...el.com wrote:
>> From: Niravkumar L Rabara <niravkumar.l.rabara@...el.com>
>>
>> Add the initial device tree files for Intel's Agilex5 SoCFPGA platform.
>>
>> Signed-off-by: Adrian Ng Ho Yin <adrian.ho.yin.ng@...el.com>
>> Signed-off-by: Niravkumar L Rabara <niravkumar.l.rabara@...el.com>
>> ---
>> arch/arm64/boot/dts/intel/Makefile | 3 +
>> .../arm64/boot/dts/intel/socfpga_agilex5.dtsi | 641
>> ++++++++++++++++++ .../boot/dts/intel/socfpga_agilex5_socdk.dts |
>> 184 +++++ .../dts/intel/socfpga_agilex5_socdk_nand.dts | 131 ++++
>> .../dts/intel/socfpga_agilex5_socdk_swvp.dts | 248 +++++++
>> 5 files changed, 1207 insertions(+)
>> create mode 100644 arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi
>> create mode 100644
>> arch/arm64/boot/dts/intel/socfpga_agilex5_socdk.dts
>> create mode 100644
>> arch/arm64/boot/dts/intel/socfpga_agilex5_socdk_nand.dts
>> create mode 100644
>> arch/arm64/boot/dts/intel/socfpga_agilex5_socdk_swvp.dts
>>
>> diff --git a/arch/arm64/boot/dts/intel/Makefile
>> b/arch/arm64/boot/dts/intel/Makefile
>> index c2a723838344..bb74a7e30e58 100644
>> --- a/arch/arm64/boot/dts/intel/Makefile
>> +++ b/arch/arm64/boot/dts/intel/Makefile
>> @@ -2,5 +2,8 @@
>> dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += socfpga_agilex_n6000.dtb \
>> socfpga_agilex_socdk.dtb \
>> socfpga_agilex_socdk_nand.dtb \
>> + socfpga_agilex5_socdk.dtb \
>> + socfpga_agilex5_socdk_nand.dtb \
>> + socfpga_agilex5_socdk_swvp.dtb \
>> socfpga_n5x_socdk.dtb
>> dtb-$(CONFIG_ARCH_KEEMBAY) += keembay-evm.dtb diff --git
>> a/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi
>> b/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi
>> new file mode 100644
>> index 000000000000..9454d88d6457
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi
>> @@ -0,0 +1,641 @@
>> +// SPDX-License-Identifier: GPL-2.0
>
>Drop indent before license.
>
>> +/*
>> + * Copyright (C) 2023, Intel Corporation */
>> +
>> +/dts-v1/;
>> +#include <dt-bindings/reset/altr,rst-mgr-agilex5.h>
>> +#include <dt-bindings/gpio/gpio.h>
>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>> +#include <dt-bindings/interrupt-controller/irq.h>
>> +#include <dt-bindings/clock/agilex5-clock.h>
>> +
>> +/ {
>> + compatible = "intel,socfpga-agilex";
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> +
>> + reserved-memory {
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> + ranges;
>> +
>> + service_reserved: svcbuffer@0 {
>> + compatible = "shared-dma-pool";
>> + reg = <0x0 0x80000000 0x0 0x2000000>;
>> + alignment = <0x1000>;
>> + no-map;
>> + };
>> + };
>> +
>> + cpus {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + cpu0: cpu@0 {
>> + compatible = "arm,cortex-a55";
>> + device_type = "cpu";
>> + enable-method = "psci";
>> + reg = <0x0>;
>> + };
>> +
>> + cpu1: cpu@1 {
>> + compatible = "arm,cortex-a55";
>> + device_type = "cpu";
>> + enable-method = "psci";
>> + reg = <0x100>;
>> + };
>> +
>> + cpu2: cpu@2 {
>> + compatible = "arm,cortex-a76";
>> + device_type = "cpu";
>> + enable-method = "psci";
>> + reg = <0x200>;
>> + };
>> +
>> + cpu3: cpu@3 {
>> + compatible = "arm,cortex-a76";
>> + device_type = "cpu";
>> + enable-method = "psci";
>> + reg = <0x300>;
>> + };
>> + };
>> +
>> + psci {
>> + compatible = "arm,psci-0.2";
>> + method = "smc";
>> + };
>> +
>> + intc: interrupt-controller@...00000 {
>> + compatible = "arm,gic-v3", "arm,cortex-a15-gic";
>
>reg is always after compatible. Then ranges, if applicable.
>
>> + #interrupt-cells = <3>;
>> + #address-cells = <2>;
>> + #size-cells =<2>;
>> + interrupt-controller;
>> + #redistributor-regions = <1>;
>> + label = "GIC";
>
>It does not look like you tested the DTS against bindings. Please run `make dtbs_check` (see Documentation/devicetree/bindings/writing-schema.rst or https://www.linaro.org/blog/tips-and-tricks-for-validating-devicetree-sources-with-the-devicetree-schema/
>for instructions).
>
>> + status = "okay";
>
>Drop, you don't need status.
>
>> + ranges;
>> + redistributor-stride = <0x0 0x20000>;
>> + reg = <0x0 0x1d000000 0 0x10000>,
>> + <0x0 0x1d060000 0 0x100000>;
>> +
>> + its: msi-controller@...40000 {
>> + compatible = "arm,gic-v3-its";
>> + reg = <0x0 0x1d040000 0x0 0x20000>;
>> + label = "ITS";
>> + msi-controller;
>> + status = "okay";
>
>Drop
>
>Anyway, entire node should be in soc. You clearly did not test it with dtbs W=1. Neither with dtbs_check.
>
>
>> + };
>> + };
>> +
>> + /* Clock tree 5 main sources*/
>> + clocks {
>> + cb_intosc_hs_div2_clk: cb-intosc-hs-div2-clk {
>> + #clock-cells = <0>;
>> + compatible = "fixed-clock";
>> + };
>> +
>> + cb_intosc_ls_clk: cb-intosc-ls-clk {
>> + #clock-cells = <0>;
>> + compatible = "fixed-clock";
>> + };
>> +
>> + f2s_free_clk: f2s-free-clk {
>> + #clock-cells = <0>;
>> + compatible = "fixed-clock";
>> + };
>> +
>> + osc1: osc1 {
>> + #clock-cells = <0>;
>> + compatible = "fixed-clock";
>> + };
>> +
>> + qspi_clk: qspi-clk {
>> + #clock-cells = <0>;
>> + compatible = "fixed-clock";
>> + clock-frequency = <200000000>;
>> + };
>> + };
>> +
>> + timer {
>> + compatible = "arm,armv8-timer";
>> + interrupt-parent = <&intc>;
>> + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>> + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>> + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>> + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
>> + };
>> +
>> + usbphy0: usbphy {
>> + #phy-cells = <0>;
>> + compatible = "usb-nop-xceiv";
>> + };
>> +
>> + soc {
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + compatible = "simple-bus";
>> + device_type = "soc";
>> + interrupt-parent = <&intc>;
>> + ranges = <0 0 0 0xffffffff>;
>> +
>> + clkmgr: clock-controller@...10000 {
>> + compatible = "intel,agilex5-clkmgr";
>> + reg = <0x10d10000 0x1000>;
>> + #clock-cells = <1>;
>> + };
>> +
>> + stmmac_axi_setup: stmmac-axi-config {
>> + snps,wr_osr_lmt = <31>;
>> + snps,rd_osr_lmt = <31>;
>> + snps,blen = <0 0 0 32 16 8 4>;
>> + };
>> +
>> + mtl_rx_setup: rx-queues-config {
>
>These two nodes do not belong to SoC. Soc is for MMIO-based nodes.
>
>
>> + snps,rx-queues-to-use = <8>;
>> + snps,rx-sched-sp;
>> + queue0 {
>> + snps,dcb-algorithm;
>> + snps,map-to-dma-channel = <0x0>;
>> + };
>> + queue1 {
>> + snps,dcb-algorithm;
>> + snps,map-to-dma-channel = <0x1>;
>> + };
>> + queue2 {
>> + snps,dcb-algorithm;
>> + snps,map-to-dma-channel = <0x2>;
>> + };
>> + queue3 {
>> + snps,dcb-algorithm;
>> + snps,map-to-dma-channel = <0x3>;
>> + };
>> + queue4 {
>> + snps,dcb-algorithm;
>> + snps,map-to-dma-channel = <0x4>;
>> + };
>> + queue5 {
>> + snps,dcb-algorithm;
>> + snps,map-to-dma-channel = <0x5>;
>> + };
>> + queue6 {
>> + snps,dcb-algorithm;
>> + snps,map-to-dma-channel = <0x6>;
>> + };
>> + queue7 {
>> + snps,dcb-algorithm;
>> + snps,map-to-dma-channel = <0x7>;
>> + };
>> + };
>> +
>> + mtl_tx_setup: tx-queues-config {
>
>This as well
>
>> + snps,tx-queues-to-use = <8>;
>> + snps,tx-sched-wrr;
>> + queue0 {
>> + snps,weight = <0x09>;
>> + snps,dcb-algorithm;
>> + };
>> + queue1 {
>> + snps,weight = <0x0A>;
>> + snps,dcb-algorithm;
>> + };
>> + queue2 {
>> + snps,weight = <0x0B>;
>> + snps,dcb-algorithm;
>> + };
>> + queue3 {
>> + snps,weight = <0x0C>;
>> + snps,dcb-algorithm;
>> + };
>> + queue4 {
>> + snps,weight = <0x0D>;
>> + snps,dcb-algorithm;
>> + };
>> + queue5 {
>> + snps,weight = <0x0E>;
>> + snps,dcb-algorithm;
>> + };
>> + queue6 {
>> + snps,weight = <0x0F>;
>> + snps,dcb-algorithm;
>> + };
>> + queue7 {
>> + snps,weight = <0x10>;
>> + snps,dcb-algorithm;
>> + };
>> + };
>> +
>> + gmac0: ethernet@...10000 {
>> + compatible = "altr,socfpga-stmmac-a10-s10",
>> + "snps,dwxgmac-2.10",
>> + "snps,dwxgmac";
>
>You have broken alignment.
>
>> + reg = <0x10810000 0x3500>;
>> + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
>
>In multiple places. Really.
>
>> + <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
>> + interrupt-names = "macirq",
>> + "macirq_tx0",
>
>This is ugly.
>
>> + "macirq_tx1",
>> + "macirq_tx2",
>> + "macirq_tx3",
>> + "macirq_tx4",
>> + "macirq_tx5",
>> + "macirq_tx6",
>> + "macirq_tx7",
>> + "macirq_rx0",
>> + "macirq_rx1",
>> + "macirq_rx2",
>> + "macirq_rx3",
>> + "macirq_rx4",
>> + "macirq_rx5",
>> + "macirq_rx6",
>> + "macirq_rx7";
>> + mac-address = [00 00 00 00 00 00];
>
>Drop, it's SoC file.
Will remove these nodes, ethernet related changes will be submitted in
separate patch later.
>
>> + resets = <&rst EMAC0_RESET>, <&rst EMAC0_OCP_RESET>;
>> + reset-names = "stmmaceth", "stmmaceth-ocp";
>> + tx-fifo-depth = <32768>;
>> + rx-fifo-depth = <16384>;
>> + snps,multicast-filter-bins = <64>;
>> + snps,perfect-filter-entries = <64>;
>> + snps,axi-config = <&stmmac_axi_setup>;
>> + snps,mtl-rx-config = <&mtl_rx_setup>;
>> + snps,mtl-tx-config = <&mtl_tx_setup>;
>> + snps,pbl = <32>;
>> + snps,pblx8;
>> + snps,multi-irq-en;
>> + snps,tso;
>> + altr,sysmgr-syscon = <&sysmgr 0x44 0>;
>> + altr,smtg-hub;
>> + snps,rx-vlan-offload;
>> + clocks = <&clkmgr AGILEX5_EMAC0_CLK>, <&clkmgr AGILEX5_EMAC_PTP_CLK>;
>> + clock-names = "stmmaceth", "ptp_ref";
>> + status = "disabled";
>> + };
>> +
>> + i2c0: i2c@...02800 {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>
>compatible first, reg second.
>
>> + compatible = "snps,designware-i2c";
>> + reg = <0x10c02800 0x100>;
>> + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
>> + resets = <&rst I2C0_RESET>;
>> + clocks = <&clkmgr AGILEX5_L4_SP_CLK>;
>> + status = "disabled";
>> + };
>> +
>> + i2c1: i2c@...02900 {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + compatible = "snps,designware-i2c";
>> + reg = <0x10c02900 0x100>;
>> + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
>> + resets = <&rst I2C1_RESET>;
>> + clocks = <&clkmgr AGILEX5_L4_SP_CLK>;
>> + status = "disabled";
>> + };
>> +
>> + i2c2: i2c@...02a00 {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + compatible = "snps,designware-i2c";
>> + reg = <0x10c02a00 0x100>;
>> + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
>> + resets = <&rst I2C2_RESET>;
>> + clocks = <&clkmgr AGILEX5_L4_SP_CLK>;
>> + status = "disabled";
>> + };
>> +
>> + i2c3: i2c@...02b00 {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + compatible = "snps,designware-i2c";
>> + reg = <0x10c02b00 0x100>;
>> + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
>> + resets = <&rst I2C3_RESET>;
>> + clocks = <&clkmgr AGILEX5_L4_SP_CLK>;
>> + status = "disabled";
>> + };
>> +
>> + i2c4: i2c@...02c00 {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + compatible = "snps,designware-i2c";
>> + reg = <0x10c02c00 0x100>;
>> + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
>> + resets = <&rst I2C4_RESET>;
>> + clocks = <&clkmgr AGILEX5_L4_SP_CLK>;
>> + status = "disabled";
>> + };
>> +
>> + i3c0: i3c@...a0000 {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + compatible = "snps,dw-i3c-master-1.00a";
>> + reg = <0x10da0000 0x1000>;
>> + interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
>> + resets = <&rst I3C0_RESET>;
>> + clocks = <&clkmgr AGILEX5_L4_MP_CLK>;
>> + status = "disabled";
>> + };
>> +
>> + i3c1: i3c@...a1000 {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + compatible = "snps,dw-i3c-master-1.00a";
>> + reg = <0x10da1000 0x1000>;
>> + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
>> + resets = <&rst I3C1_RESET>;
>> + clocks = <&clkmgr AGILEX5_L4_MP_CLK>;
>> + status = "disabled";
>> + };
>> +
>> + gpio1: gpio@...03300 {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + compatible = "snps,dw-apb-gpio";
>> + reg = <0x10C03300 0x100>;
>> + resets = <&rst GPIO1_RESET>;
>> + status = "disabled";
>> +
>> + portb: gpio-controller@0 {
>> + compatible = "snps,dw-apb-gpio-port";
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> + snps,nr-gpios = <24>;
>> + reg = <0>;
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
>> + };
>> + };
>> +
>> + mmc: mmc0@...08000 {
>
>It does not look like you tested the DTS against bindings. Please run `make dtbs_check` (see Documentation/devicetree/bindings/writing-schema.rst or https://www.linaro.org/blog/tips-and-tricks-for-validating-devicetree-sources-with-the-devicetree-schema/
>for instructions).
>
>Sorry, but your DTS lacks any basic (internal!) review and basic tests with automated tools.
>
>..
>
>> + spi0: spi@...a4000 {
>> + compatible = "snps,dw-apb-ssi";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + reg = <0x10da4000 0x1000>;
>> + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
>> + resets = <&rst SPIM0_RESET>;
>> + reset-names = "spi";
>> + reg-io-width = <4>;
>> + num-cs = <4>;
>> + clocks = <&clkmgr AGILEX5_L4_MAIN_CLK>;
>> + dmas = <&dmac0 2>, <&dmac0 3>;
>> + dma-names ="tx", "rx";
>> +
>> + status = "disabled";
>> +
>> + flash: m25p128@0 {
>
>It's getting worse...
>
>> + status = "okay";
>
>and worse
>
>> + compatible = "st,m25p80";
>> + spi-max-frequency = <25000000>;
>> + m25p,fast-read;
>> + reg = <0>;
>> +
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> +
>> + partition@0 {
>> + label = "spi_flash_part0";
>> + reg = <0x0 0x100000>;
>
>and less conforming to style
>
>> + };
>> + };
>> +
>
>... and less.
>...
>
>> +
>> + chosen {
>> + stdout-path = "serial0:115200n8";
>> + bootargs = "console=uart8250,mmio32,0x10c02000,115200n8 \
>> + root=/dev/ram0 rw initrd=0x10000000 init=/sbin/init \
>> + ramdisk_size=10000000 earlycon=uart8250,mmio32,0x10c02000,115200n8 \
>> + panic=-1 nosmp rootfstype=ext3";
>
>NAK. Drop entire bootags.
>
>> + };
>> +
>> + leds {
>> + compatible = "gpio-leds";
>> + hps0 {
>
>No, srsly? So all our cleanups for few years mean nothing?
>
Will fix all the review comments in v2 patch.
Thanks,
Nirav
Powered by blists - more mailing lists