lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240229101202.GB2999@thinkpad>
Date: Thu, 29 Feb 2024 15:42:02 +0530
From: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
To: Baochen Qiang <quic_bqiang@...cinc.com>
Cc: ath11k@...ts.infradead.org, linux-wireless@...r.kernel.org,
	linux-arm-msm@...r.kernel.org, mhi@...ts.linux.dev,
	davem@...emloft.net, edumazet@...gle.com, kuba@...nel.org,
	pabeni@...hat.com, netdev@...r.kernel.org
Subject: Re: [PATCH v4 1/3] bus: mhi: host: add mhi_power_down_keep_dev()

On Wed, Feb 28, 2024 at 10:22:41AM +0800, Baochen Qiang wrote:
> ath11k fails to resume:
> 
> ath11k_pci 0000:06:00.0: timeout while waiting for restart complete
> 
> This happens because when calling mhi_sync_power_up() the MHI subsystem
> eventually calls device_add() from mhi_create_devices() but the device
> creation is deferred:
> 
> mhi mhi0_IPCR: Driver qcom_mhi_qrtr force probe deferral
> 
> The reason for deferring device creation is explained in dpm_prepare():
> 
>         /*
>          * It is unsafe if probing of devices will happen during suspend or
>          * hibernation and system behavior will be unpredictable in this case.
>          * So, let's prohibit device's probing here and defer their probes
>          * instead. The normal behavior will be restored in dpm_complete().
>          */
> 
> Because the device probe is deferred, the qcom_mhi_qrtr_probe() is not
> called and thus MHI channels are not prepared:
> 
> So what this means that QRTR is not delivering messages and the QMI connection
> is not working between ath11k and the firmware, resulting a failure in firmware
> initialization.
> 
> To fix this add new function mhi_power_down_keep_dev() which doesn't destroy
> the devices for channels during power down. This way we avoid probe defer issue
> and finally can get ath11k hibernation working with the following patches.
> 
> Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30
> 
> Signed-off-by: Kalle Valo <quic_kvalo@...cinc.com>

Did Kalle co-author this patch? If so, his Co-developed-by tag should be
added.

> Signed-off-by: Baochen Qiang <quic_bqiang@...cinc.com>

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>

- Mani

> ---
>  drivers/bus/mhi/host/internal.h |  4 +++-
>  drivers/bus/mhi/host/pm.c       | 42 ++++++++++++++++++++++++++++-----
>  include/linux/mhi.h             | 18 +++++++++++++-
>  3 files changed, 56 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/bus/mhi/host/internal.h b/drivers/bus/mhi/host/internal.h
> index 5fe49311b8eb..aaad40a07f69 100644
> --- a/drivers/bus/mhi/host/internal.h
> +++ b/drivers/bus/mhi/host/internal.h
> @@ -80,6 +80,7 @@ enum dev_st_transition {
>  	DEV_ST_TRANSITION_FP,
>  	DEV_ST_TRANSITION_SYS_ERR,
>  	DEV_ST_TRANSITION_DISABLE,
> +	DEV_ST_TRANSITION_DISABLE_DESTROY_DEVICE,
>  	DEV_ST_TRANSITION_MAX,
>  };
>  
> @@ -90,7 +91,8 @@ enum dev_st_transition {
>  	dev_st_trans(MISSION_MODE,	"MISSION MODE")		\
>  	dev_st_trans(FP,		"FLASH PROGRAMMER")	\
>  	dev_st_trans(SYS_ERR,		"SYS ERROR")		\
> -	dev_st_trans_end(DISABLE,	"DISABLE")
> +	dev_st_trans(DISABLE,		"DISABLE")		\
> +	dev_st_trans_end(DISABLE_DESTROY_DEVICE, "DISABLE (DESTROY DEVICE)")
>  
>  extern const char * const dev_state_tran_str[DEV_ST_TRANSITION_MAX];
>  #define TO_DEV_STATE_TRANS_STR(state) (((state) >= DEV_ST_TRANSITION_MAX) ? \
> diff --git a/drivers/bus/mhi/host/pm.c b/drivers/bus/mhi/host/pm.c
> index 8b40d3f01acc..11c0e751f223 100644
> --- a/drivers/bus/mhi/host/pm.c
> +++ b/drivers/bus/mhi/host/pm.c
> @@ -468,7 +468,8 @@ static int mhi_pm_mission_mode_transition(struct mhi_controller *mhi_cntrl)
>  }
>  
>  /* Handle shutdown transitions */
> -static void mhi_pm_disable_transition(struct mhi_controller *mhi_cntrl)
> +static void mhi_pm_disable_transition(struct mhi_controller *mhi_cntrl,
> +				      bool destroy_device)
>  {
>  	enum mhi_pm_state cur_state;
>  	struct mhi_event *mhi_event;
> @@ -530,8 +531,16 @@ static void mhi_pm_disable_transition(struct mhi_controller *mhi_cntrl)
>  	dev_dbg(dev, "Waiting for all pending threads to complete\n");
>  	wake_up_all(&mhi_cntrl->state_event);
>  
> -	dev_dbg(dev, "Reset all active channels and remove MHI devices\n");
> -	device_for_each_child(&mhi_cntrl->mhi_dev->dev, NULL, mhi_destroy_device);
> +	/*
> +	 * Only destroy the 'struct device' for channels if indicated by the
> +	 * 'destroy_device' flag. Because, during system suspend or hibernation
> +	 * state, there is no need to destroy the 'struct device' as the endpoint
> +	 * device would still be physically attached to the machine.
> +	 */
> +	if (destroy_device) {
> +		dev_dbg(dev, "Reset all active channels and remove MHI devices\n");
> +		device_for_each_child(&mhi_cntrl->mhi_dev->dev, NULL, mhi_destroy_device);
> +	}
>  
>  	mutex_lock(&mhi_cntrl->pm_mutex);
>  
> @@ -821,7 +830,10 @@ void mhi_pm_st_worker(struct work_struct *work)
>  			mhi_pm_sys_error_transition(mhi_cntrl);
>  			break;
>  		case DEV_ST_TRANSITION_DISABLE:
> -			mhi_pm_disable_transition(mhi_cntrl);
> +			mhi_pm_disable_transition(mhi_cntrl, false);
> +			break;
> +		case DEV_ST_TRANSITION_DISABLE_DESTROY_DEVICE:
> +			mhi_pm_disable_transition(mhi_cntrl, true);
>  			break;
>  		default:
>  			break;
> @@ -1175,7 +1187,8 @@ int mhi_async_power_up(struct mhi_controller *mhi_cntrl)
>  }
>  EXPORT_SYMBOL_GPL(mhi_async_power_up);
>  
> -void mhi_power_down(struct mhi_controller *mhi_cntrl, bool graceful)
> +static void __mhi_power_down(struct mhi_controller *mhi_cntrl, bool graceful,
> +			     bool destroy_device)
>  {
>  	enum mhi_pm_state cur_state, transition_state;
>  	struct device *dev = &mhi_cntrl->mhi_dev->dev;
> @@ -1211,15 +1224,32 @@ void mhi_power_down(struct mhi_controller *mhi_cntrl, bool graceful)
>  	write_unlock_irq(&mhi_cntrl->pm_lock);
>  	mutex_unlock(&mhi_cntrl->pm_mutex);
>  
> -	mhi_queue_state_transition(mhi_cntrl, DEV_ST_TRANSITION_DISABLE);
> +	if (destroy_device)
> +		mhi_queue_state_transition(mhi_cntrl,
> +					   DEV_ST_TRANSITION_DISABLE_DESTROY_DEVICE);
> +	else
> +		mhi_queue_state_transition(mhi_cntrl,
> +					   DEV_ST_TRANSITION_DISABLE);
>  
>  	/* Wait for shutdown to complete */
>  	flush_work(&mhi_cntrl->st_worker);
>  
>  	disable_irq(mhi_cntrl->irq[0]);
>  }
> +
> +void mhi_power_down(struct mhi_controller *mhi_cntrl, bool graceful)
> +{
> +	__mhi_power_down(mhi_cntrl, graceful, true);
> +}
>  EXPORT_SYMBOL_GPL(mhi_power_down);
>  
> +void mhi_power_down_keep_dev(struct mhi_controller *mhi_cntrl,
> +			       bool graceful)
> +{
> +	__mhi_power_down(mhi_cntrl, graceful, false);
> +}
> +EXPORT_SYMBOL_GPL(mhi_power_down_keep_dev);
> +
>  int mhi_sync_power_up(struct mhi_controller *mhi_cntrl)
>  {
>  	int ret = mhi_async_power_up(mhi_cntrl);
> diff --git a/include/linux/mhi.h b/include/linux/mhi.h
> index 77b8c0a26674..cde01e133a1b 100644
> --- a/include/linux/mhi.h
> +++ b/include/linux/mhi.h
> @@ -630,12 +630,28 @@ int mhi_async_power_up(struct mhi_controller *mhi_cntrl);
>  int mhi_sync_power_up(struct mhi_controller *mhi_cntrl);
>  
>  /**
> - * mhi_power_down - Start MHI power down sequence
> + * mhi_power_down - Power down the MHI device and also destroy the
> + *                  'struct device' for the channels associated with it.
> + *                  See also mhi_power_down_keep_dev() which is a variant
> + *                  of this API that keeps the 'struct device' for channels
> + *                  (useful during suspend/hibernation).
>   * @mhi_cntrl: MHI controller
>   * @graceful: Link is still accessible, so do a graceful shutdown process
>   */
>  void mhi_power_down(struct mhi_controller *mhi_cntrl, bool graceful);
>  
> +/**
> + * mhi_power_down_keep_dev - Power down the MHI device but keep the 'struct
> + *                           device' for the channels associated with it.
> + *                           This is a variant of 'mhi_power_down()' and
> + *                           useful in scenarios such as suspend/hibernation
> + *                           where destroying of the 'struct device' is not
> + *                           needed.
> + * @mhi_cntrl: MHI controller
> + * @graceful: Link is still accessible, so do a graceful shutdown process
> + */
> +void mhi_power_down_keep_dev(struct mhi_controller *mhi_cntrl, bool graceful);
> +
>  /**
>   * mhi_unprepare_after_power_down - Free any allocated memory after power down
>   * @mhi_cntrl: MHI controller
> -- 
> 2.25.1
> 

-- 
மணிவண்ணன் சதாசிவம்

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ