[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240229101254.GC2999@thinkpad>
Date: Thu, 29 Feb 2024 15:42:54 +0530
From: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
To: Baochen Qiang <quic_bqiang@...cinc.com>
Cc: ath11k@...ts.infradead.org, linux-wireless@...r.kernel.org,
linux-arm-msm@...r.kernel.org, mhi@...ts.linux.dev,
davem@...emloft.net, edumazet@...gle.com, kuba@...nel.org,
pabeni@...hat.com, netdev@...r.kernel.org
Subject: Re: [PATCH v4 2/3] net: qrtr: support suspend/hibernation
On Wed, Feb 28, 2024 at 10:22:42AM +0800, Baochen Qiang wrote:
> MHI devices may not be destroyed during suspend/hibernation, so need
> to unprepare/prepare MHI channels throughout the transition, this is
> done by adding suspend/resume callbacks.
>
> The suspend callback is called in the late suspend stage, this means
> MHI channels are still alive at suspend stage, and that makes it
> possible for an MHI controller driver to communicate with others over
> those channels at suspend stage. While the resume callback is called
> in the early resume stage, for a similar reason.
>
> Also note that we won't do unprepare/prepare when MHI device is in
> suspend state because it's pointless if MHI is only meant to go through
> a suspend/resume transition, instead of a complete power cycle.
>
> Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30
>
> Signed-off-by: Baochen Qiang <quic_bqiang@...cinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
- Mani
> ---
> net/qrtr/mhi.c | 46 ++++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 46 insertions(+)
>
> diff --git a/net/qrtr/mhi.c b/net/qrtr/mhi.c
> index 9ced13c0627a..69f53625a049 100644
> --- a/net/qrtr/mhi.c
> +++ b/net/qrtr/mhi.c
> @@ -118,6 +118,51 @@ static const struct mhi_device_id qcom_mhi_qrtr_id_table[] = {
> };
> MODULE_DEVICE_TABLE(mhi, qcom_mhi_qrtr_id_table);
>
> +static int __maybe_unused qcom_mhi_qrtr_pm_suspend_late(struct device *dev)
> +{
> + struct mhi_device *mhi_dev = container_of(dev, struct mhi_device, dev);
> + enum mhi_state state;
> +
> + state = mhi_get_mhi_state(mhi_dev->mhi_cntrl);
> + /*
> + * If the device is in suspend state, then no need for the
> + * client driver to unprepare the channels.
> + */
> + if (state == MHI_STATE_M3)
> + return 0;
> +
> + mhi_unprepare_from_transfer(mhi_dev);
> +
> + return 0;
> +}
> +
> +static int __maybe_unused qcom_mhi_qrtr_pm_resume_early(struct device *dev)
> +{
> + struct mhi_device *mhi_dev = container_of(dev, struct mhi_device, dev);
> + enum mhi_state state;
> + int rc;
> +
> + state = mhi_get_mhi_state(mhi_dev->mhi_cntrl);
> + /*
> + * If the device is in suspend state, we won't unprepare channels
> + * in suspend callback, therefore no need to prepare channels when
> + * resume.
> + */
> + if (state == MHI_STATE_M3)
> + return 0;
> +
> + rc = mhi_prepare_for_transfer_autoqueue(mhi_dev);
> + if (rc)
> + dev_err(dev, "failed to prepare for autoqueue transfer %d\n", rc);
> +
> + return rc;
> +}
> +
> +static const struct dev_pm_ops qcom_mhi_qrtr_pm_ops = {
> + SET_LATE_SYSTEM_SLEEP_PM_OPS(qcom_mhi_qrtr_pm_suspend_late,
> + qcom_mhi_qrtr_pm_resume_early)
> +};
> +
> static struct mhi_driver qcom_mhi_qrtr_driver = {
> .probe = qcom_mhi_qrtr_probe,
> .remove = qcom_mhi_qrtr_remove,
> @@ -126,6 +171,7 @@ static struct mhi_driver qcom_mhi_qrtr_driver = {
> .id_table = qcom_mhi_qrtr_id_table,
> .driver = {
> .name = "qcom_mhi_qrtr",
> + .pm = &qcom_mhi_qrtr_pm_ops,
> },
> };
>
> --
> 2.25.1
>
--
மணிவண்ணன் சதாசிவம்
Powered by blists - more mailing lists