| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240530101515.201635-1-saikrishnag@marvell.com>
Date: Thu, 30 May 2024 15:45:15 +0530
From: Sai Krishna <saikrishnag@...vell.com>
To: <davem@...emloft.net>, <edumazet@...gle.com>, <kuba@...nel.org>,
<pabeni@...hat.com>, <netdev@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <sgoutham@...vell.com>,
<gakula@...vell.com>, <hkelam@...vell.com>, <sbhatta@...vell.com>
CC: Sai Krishna <saikrishnag@...vell.com>
Subject: [net-next PATCH v3] octeontx2-pf: Add ucast filter count configurability via devlink.
Added a devlink param to set/modify unicast filter count. Currently
it's hardcoded with a macro.
commands:
To get the current unicast filter count
# devlink dev param show pci/0002:02:00.0 name unicast_filter_count
To change/set the unicast filter count
# devlink dev param set pci/0002:02:00.0 name unicast_filter_count
value 5 cmode runtime
Signed-off-by: Sai Krishna <saikrishnag@...vell.com>
---
v3:
- Addressed review comments given by Jakub Kicinski
1. Documented unicast_filter_count devlink param
2. Minor change to match upstream code base
v2:
- Addressed review comments given by Simon Horman
1. Updated the commit message with example commads
2. Modified/optimized conditions
.../networking/devlink/octeontx2.rst | 16 +++++
.../marvell/octeontx2/nic/otx2_common.h | 7 +-
.../marvell/octeontx2/nic/otx2_devlink.c | 64 +++++++++++++++++++
.../marvell/octeontx2/nic/otx2_flows.c | 20 +++---
.../ethernet/marvell/octeontx2/nic/otx2_pf.c | 2 +-
5 files changed, 95 insertions(+), 14 deletions(-)
diff --git a/Documentation/networking/devlink/octeontx2.rst b/Documentation/networking/devlink/octeontx2.rst
index 610de99b728a..5910289b4d4e 100644
--- a/Documentation/networking/devlink/octeontx2.rst
+++ b/Documentation/networking/devlink/octeontx2.rst
@@ -40,3 +40,19 @@ The ``octeontx2 AF`` driver implements the following driver-specific parameters.
- runtime
- Use to set the quantum which hardware uses for scheduling among transmit queues.
Hardware uses weighted DWRR algorithm to schedule among all transmit queues.
+
+The ``octeontx2 PF`` driver implements the following driver-specific parameters.
+
+.. list-table:: Driver-specific parameters implemented
+ :widths: 5 5 5 85
+
+ * - Name
+ - Type
+ - Mode
+ - Description
+ * - ``unicast_filter_count``
+ - u8
+ - runtime
+ - Used to Set/modify unicast filter count, which helps in better utilization of
+ resources against possible wastage(un-used) with current scheme of hardcoded
+ unicast count.
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h
index 24fbbef265a6..f27a3456ae64 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h
@@ -346,12 +346,9 @@ struct otx2_flow_config {
u16 *def_ent;
u16 nr_flows;
#define OTX2_DEFAULT_FLOWCOUNT 16
-#define OTX2_MAX_UNICAST_FLOWS 8
+#define OTX2_DEFAULT_UNICAST_FLOWS 4
#define OTX2_MAX_VLAN_FLOWS 1
#define OTX2_MAX_TC_FLOWS OTX2_DEFAULT_FLOWCOUNT
-#define OTX2_MCAM_COUNT (OTX2_DEFAULT_FLOWCOUNT + \
- OTX2_MAX_UNICAST_FLOWS + \
- OTX2_MAX_VLAN_FLOWS)
u16 unicast_offset;
u16 rx_vlan_offset;
u16 vf_vlan_offset;
@@ -365,6 +362,7 @@ struct otx2_flow_config {
u16 max_flows;
refcount_t mark_flows;
struct list_head flow_list_tc;
+ u8 ucast_flt_cnt;
bool ntuple;
};
@@ -1067,6 +1065,7 @@ int otx2_handle_ntuple_tc_features(struct net_device *netdev,
int otx2_smq_flush(struct otx2_nic *pfvf, int smq);
void otx2_free_bufs(struct otx2_nic *pfvf, struct otx2_pool *pool,
u64 iova, int size);
+int otx2_mcam_entry_init(struct otx2_nic *pfvf);
/* tc support */
int otx2_init_tc(struct otx2_nic *nic);
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_devlink.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_devlink.c
index 99ddf31269d9..79cd8f1777d4 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_devlink.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_devlink.c
@@ -64,9 +64,68 @@ static int otx2_dl_mcam_count_get(struct devlink *devlink, u32 id,
return 0;
}
+static int otx2_dl_ucast_flt_cnt_set(struct devlink *devlink, u32 id,
+ struct devlink_param_gset_ctx *ctx,
+ struct netlink_ext_ack *extack)
+{
+ struct otx2_devlink *otx2_dl = devlink_priv(devlink);
+ struct otx2_nic *pfvf = otx2_dl->pfvf;
+ int err;
+
+ pfvf->flow_cfg->ucast_flt_cnt = ctx->val.vu8;
+
+ otx2_mcam_flow_del(pfvf);
+ err = otx2_mcam_entry_init(pfvf);
+ if (err)
+ return err;
+
+ return 0;
+}
+
+static int otx2_dl_ucast_flt_cnt_get(struct devlink *devlink, u32 id,
+ struct devlink_param_gset_ctx *ctx)
+{
+ struct otx2_devlink *otx2_dl = devlink_priv(devlink);
+ struct otx2_nic *pfvf = otx2_dl->pfvf;
+
+ ctx->val.vu8 = pfvf->flow_cfg ? pfvf->flow_cfg->ucast_flt_cnt : 0;
+
+ return 0;
+}
+
+static int otx2_dl_ucast_flt_cnt_validate(struct devlink *devlink, u32 id,
+ union devlink_param_value val,
+ struct netlink_ext_ack *extack)
+{
+ struct otx2_devlink *otx2_dl = devlink_priv(devlink);
+ struct otx2_nic *pfvf = otx2_dl->pfvf;
+
+ /* Check for UNICAST filter support*/
+ if (!(pfvf->flags & OTX2_FLAG_UCAST_FLTR_SUPPORT)) {
+ NL_SET_ERR_MSG_MOD(extack,
+ "Unicast filter not enabled");
+ return -EINVAL;
+ }
+
+ if (!pfvf->flow_cfg) {
+ NL_SET_ERR_MSG_MOD(extack,
+ "pfvf->flow_cfg not initialized");
+ return -EINVAL;
+ }
+
+ if (pfvf->flow_cfg->nr_flows) {
+ NL_SET_ERR_MSG_MOD(extack,
+ "Cannot modify count when there are active rules");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
enum otx2_dl_param_id {
OTX2_DEVLINK_PARAM_ID_BASE = DEVLINK_PARAM_GENERIC_ID_MAX,
OTX2_DEVLINK_PARAM_ID_MCAM_COUNT,
+ OTX2_DEVLINK_PARAM_ID_UCAST_FLT_CNT,
};
static const struct devlink_param otx2_dl_params[] = {
@@ -75,6 +134,11 @@ static const struct devlink_param otx2_dl_params[] = {
BIT(DEVLINK_PARAM_CMODE_RUNTIME),
otx2_dl_mcam_count_get, otx2_dl_mcam_count_set,
otx2_dl_mcam_count_validate),
+ DEVLINK_PARAM_DRIVER(OTX2_DEVLINK_PARAM_ID_UCAST_FLT_CNT,
+ "unicast_filter_count", DEVLINK_PARAM_TYPE_U8,
+ BIT(DEVLINK_PARAM_CMODE_RUNTIME),
+ otx2_dl_ucast_flt_cnt_get, otx2_dl_ucast_flt_cnt_set,
+ otx2_dl_ucast_flt_cnt_validate),
};
static const struct devlink_ops otx2_devlink_ops = {
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_flows.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_flows.c
index bc5819237ed7..98c31a16c70b 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_flows.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_flows.c
@@ -12,8 +12,6 @@
#define OTX2_DEFAULT_ACTION 0x1
-static int otx2_mcam_entry_init(struct otx2_nic *pfvf);
-
struct otx2_flow {
struct ethtool_rx_flow_spec flow_spec;
struct list_head list;
@@ -161,7 +159,7 @@ int otx2_alloc_mcam_entries(struct otx2_nic *pfvf, u16 count)
}
EXPORT_SYMBOL(otx2_alloc_mcam_entries);
-static int otx2_mcam_entry_init(struct otx2_nic *pfvf)
+int otx2_mcam_entry_init(struct otx2_nic *pfvf)
{
struct otx2_flow_config *flow_cfg = pfvf->flow_cfg;
struct npc_get_field_status_req *freq;
@@ -172,7 +170,7 @@ static int otx2_mcam_entry_init(struct otx2_nic *pfvf)
int ent, count;
vf_vlan_max_flows = pfvf->total_vfs * OTX2_PER_VF_VLAN_FLOWS;
- count = OTX2_MAX_UNICAST_FLOWS +
+ count = flow_cfg->ucast_flt_cnt +
OTX2_MAX_VLAN_FLOWS + vf_vlan_max_flows;
flow_cfg->def_ent = devm_kmalloc_array(pfvf->dev, count,
@@ -214,7 +212,7 @@ static int otx2_mcam_entry_init(struct otx2_nic *pfvf)
flow_cfg->vf_vlan_offset = 0;
flow_cfg->unicast_offset = vf_vlan_max_flows;
flow_cfg->rx_vlan_offset = flow_cfg->unicast_offset +
- OTX2_MAX_UNICAST_FLOWS;
+ flow_cfg->ucast_flt_cnt;
pfvf->flags |= OTX2_FLAG_UCAST_FLTR_SUPPORT;
/* Check if NPC_DMAC field is supported
@@ -255,6 +253,7 @@ static int otx2_mcam_entry_init(struct otx2_nic *pfvf)
refcount_set(&flow_cfg->mark_flows, 1);
return 0;
}
+EXPORT_SYMBOL(otx2_mcam_entry_init);
/* TODO : revisit on size */
#define OTX2_DMAC_FLTR_BITMAP_SZ (4 * 2048 + 32)
@@ -302,6 +301,8 @@ int otx2_mcam_flow_init(struct otx2_nic *pf)
INIT_LIST_HEAD(&pf->flow_cfg->flow_list);
INIT_LIST_HEAD(&pf->flow_cfg->flow_list_tc);
+ pf->flow_cfg->ucast_flt_cnt = OTX2_DEFAULT_UNICAST_FLOWS;
+
/* Allocate bare minimum number of MCAM entries needed for
* unicast and ntuple filters.
*/
@@ -314,7 +315,7 @@ int otx2_mcam_flow_init(struct otx2_nic *pf)
return 0;
pf->mac_table = devm_kzalloc(pf->dev, sizeof(struct otx2_mac_table)
- * OTX2_MAX_UNICAST_FLOWS, GFP_KERNEL);
+ * pf->flow_cfg->ucast_flt_cnt, GFP_KERNEL);
if (!pf->mac_table)
return -ENOMEM;
@@ -356,7 +357,7 @@ static int otx2_do_add_macfilter(struct otx2_nic *pf, const u8 *mac)
return -ENOMEM;
/* dont have free mcam entries or uc list is greater than alloted */
- if (netdev_uc_count(pf->netdev) > OTX2_MAX_UNICAST_FLOWS)
+ if (netdev_uc_count(pf->netdev) > pf->flow_cfg->ucast_flt_cnt)
return -ENOMEM;
mutex_lock(&pf->mbox.lock);
@@ -367,7 +368,7 @@ static int otx2_do_add_macfilter(struct otx2_nic *pf, const u8 *mac)
}
/* unicast offset starts with 32 0..31 for ntuple */
- for (i = 0; i < OTX2_MAX_UNICAST_FLOWS; i++) {
+ for (i = 0; i < pf->flow_cfg->ucast_flt_cnt; i++) {
if (pf->mac_table[i].inuse)
continue;
ether_addr_copy(pf->mac_table[i].addr, mac);
@@ -410,7 +411,7 @@ static bool otx2_get_mcamentry_for_mac(struct otx2_nic *pf, const u8 *mac,
{
int i;
- for (i = 0; i < OTX2_MAX_UNICAST_FLOWS; i++) {
+ for (i = 0; i < pf->flow_cfg->ucast_flt_cnt; i++) {
if (!pf->mac_table[i].inuse)
continue;
@@ -1394,6 +1395,7 @@ int otx2_destroy_mcam_flows(struct otx2_nic *pfvf)
}
pfvf->flags &= ~OTX2_FLAG_MCAM_ENTRIES_ALLOC;
+ flow_cfg->max_flows = 0;
mutex_unlock(&pfvf->mbox.lock);
return 0;
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
index f5bce3e326cc..ff05ea20409a 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
@@ -1714,7 +1714,7 @@ static void otx2_do_set_rx_mode(struct otx2_nic *pf)
return;
if ((netdev->flags & IFF_PROMISC) ||
- (netdev_uc_count(netdev) > OTX2_MAX_UNICAST_FLOWS)) {
+ (netdev_uc_count(netdev) > pf->flow_cfg->ucast_flt_cnt)) {
promisc = true;
}
--
2.25.1
Powered by blists - more mailing lists