[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240626180613.3190229-1-dave.jiang@intel.com>
Date: Wed, 26 Jun 2024 11:06:13 -0700
From: Dave Jiang <dave.jiang@...el.com>
To: ntb@...ts.linux.dev,
netdev@...r.kernel.org
Cc: jdmason@...zu.us,
allenbh@...il.com,
davem@...emloft.net,
edumazet@...gle.com,
kuba@...nel.org,
abeni@...hat.com,
Jerry Dai <jerry.dai@...el.com>
Subject: [PATCH] net: ntb_netdev: Move ntb_netdev_rx_handler() to call netif_rx() from __netif_rx()
The following is emitted when using idxd (DSA) dmanegine as the data
mover for ntb_transport that ntb_netdev uses.
[74412.546922] BUG: using smp_processor_id() in preemptible [00000000] code: irq/52-idxd-por/14526
[74412.556784] caller is netif_rx_internal+0x42/0x130
[74412.562282] CPU: 6 PID: 14526 Comm: irq/52-idxd-por Not tainted 6.9.5 #5
[74412.569870] Hardware name: Intel Corporation ArcherCity/ArcherCity, BIOS EGSDCRB1.E9I.1752.P05.2402080856 02/08/2024
[74412.581699] Call Trace:
[74412.584514] <TASK>
[74412.586933] dump_stack_lvl+0x55/0x70
[74412.591129] check_preemption_disabled+0xc8/0xf0
[74412.596374] netif_rx_internal+0x42/0x130
[74412.600957] __netif_rx+0x20/0xd0
[74412.604743] ntb_netdev_rx_handler+0x66/0x150 [ntb_netdev]
[74412.610985] ntb_complete_rxc+0xed/0x140 [ntb_transport]
[74412.617010] ntb_rx_copy_callback+0x53/0x80 [ntb_transport]
[74412.623332] idxd_dma_complete_txd+0xe3/0x160 [idxd]
[74412.628963] idxd_wq_thread+0x1a6/0x2b0 [idxd]
[74412.634046] irq_thread_fn+0x21/0x60
[74412.638134] ? irq_thread+0xa8/0x290
[74412.642218] irq_thread+0x1a0/0x290
[74412.646212] ? __pfx_irq_thread_fn+0x10/0x10
[74412.651071] ? __pfx_irq_thread_dtor+0x10/0x10
[74412.656117] ? __pfx_irq_thread+0x10/0x10
[74412.660686] kthread+0x100/0x130
[74412.664384] ? __pfx_kthread+0x10/0x10
[74412.668639] ret_from_fork+0x31/0x50
[74412.672716] ? __pfx_kthread+0x10/0x10
[74412.676978] ret_from_fork_asm+0x1a/0x30
[74412.681457] </TASK>
The cause is due to the idxd driver interrupt completion handler uses
threaded interrupt and the threaded handler is not hard or soft interrupt
context. However __netif_rx() can only be called from interrupt context.
Change the call to netif_rx() in order to allow completion via normal
context for dmaengine drivers that utilize threaded irq handling.
Fixes: baebdf48c360 ("net: dev: Makes sure netif_rx() can be invoked in any context.")
Reported-by: Jerry Dai <jerry.dai@...el.com>
Tested-by: Jerry Dai <jerry.dai@...el.com>
Signed-off-by: Dave Jiang <dave.jiang@...el.com>
---
drivers/net/ntb_netdev.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ntb_netdev.c b/drivers/net/ntb_netdev.c
index 536bd6564f8b..dade51cf599c 100644
--- a/drivers/net/ntb_netdev.c
+++ b/drivers/net/ntb_netdev.c
@@ -119,7 +119,7 @@ static void ntb_netdev_rx_handler(struct ntb_transport_qp *qp, void *qp_data,
skb->protocol = eth_type_trans(skb, ndev);
skb->ip_summed = CHECKSUM_NONE;
- if (__netif_rx(skb) == NET_RX_DROP) {
+ if (netif_rx(skb) == NET_RX_DROP) {
ndev->stats.rx_errors++;
ndev->stats.rx_dropped++;
} else {
--
2.45.1
Powered by blists - more mailing lists