netdev - Re: [net-next,PATCH v2] net: phy: realtek: Add support for PHY LEDs on RTL8211F

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date: Fri, 28 Jun 2024 15:27:42 +0100
From: Simon Horman <horms@...nel.org>
To: Marek Vasut <marex@...x.de>
Cc: netdev@...r.kernel.org, Alexandre Torgue <alexandre.torgue@...s.st.com>,
	Andrew Lunn <andrew@...n.ch>,
	Christophe Roullier <christophe.roullier@...s.st.com>,
	"David S . Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Heiner Kallweit <hkallweit1@...il.com>,
	Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
	Russell King <linux@...linux.org.uk>, kernel@...electronics.com,
	linux-kernel@...r.kernel.org
Subject: Re: [net-next,PATCH v2] net: phy: realtek: Add support for PHY LEDs
 on RTL8211F

On Tue, Jun 25, 2024 at 10:42:17PM +0200, Marek Vasut wrote:
> Realtek RTL8211F Ethernet PHY supports 3 LED pins which are used to
> indicate link status and activity. Add minimal LED controller driver
> supporting the most common uses with the 'netdev' trigger.
> 
> Signed-off-by: Marek Vasut <marex@...x.de>
> ---
> Cc: Alexandre Torgue <alexandre.torgue@...s.st.com>
> Cc: Andrew Lunn <andrew@...n.ch>
> Cc: Christophe Roullier <christophe.roullier@...s.st.com>
> Cc: David S. Miller <davem@...emloft.net>
> Cc: Eric Dumazet <edumazet@...gle.com>
> Cc: Heiner Kallweit <hkallweit1@...il.com>
> Cc: Jakub Kicinski <kuba@...nel.org>
> Cc: Paolo Abeni <pabeni@...hat.com>
> Cc: Russell King <linux@...linux.org.uk>
> Cc: kernel@...electronics.com
> Cc: linux-kernel@...r.kernel.org
> Cc: netdev@...r.kernel.org
> ---
> V2: - RX and TX are not differentiated, either both are set or not set,
>       filter this in rtl8211f_led_hw_is_supported()
> ---
>  drivers/net/phy/realtek.c | 106 ++++++++++++++++++++++++++++++++++++++
>  1 file changed, 106 insertions(+)
> 
> diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
> index 2174893c974f3..bed839237fb55 100644
> --- a/drivers/net/phy/realtek.c
> +++ b/drivers/net/phy/realtek.c
> @@ -32,6 +32,15 @@
>  #define RTL8211F_PHYCR2				0x19
>  #define RTL8211F_INSR				0x1d
>  
> +#define RTL8211F_LEDCR				0x10
> +#define RTL8211F_LEDCR_MODE			BIT(15)
> +#define RTL8211F_LEDCR_ACT_TXRX			BIT(4)
> +#define RTL8211F_LEDCR_LINK_1000		BIT(3)
> +#define RTL8211F_LEDCR_LINK_100			BIT(1)
> +#define RTL8211F_LEDCR_LINK_10			BIT(0)
> +#define RTL8211F_LEDCR_MASK			GENMASK(4, 0)
> +#define RTL8211F_LEDCR_SHIFT			5
> +

Hi Marek,

FWIIW, I think that if you use FIELD_PREP and FIELD_GET then
RTL8211F_LEDCR_SHIFT can be removed.

...