lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: 
 <CH0PR18MB4339D4A85FA97B2136BF7E1CCDDD2@CH0PR18MB4339.namprd18.prod.outlook.com>
Date: Wed, 3 Jul 2024 14:34:03 +0000
From: Geethasowjanya Akula <gakula@...vell.com>
To: Michal Swiatkowski <michal.swiatkowski@...ux.intel.com>
CC: "netdev@...r.kernel.org" <netdev@...r.kernel.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        "kuba@...nel.org" <kuba@...nel.org>,
        "davem@...emloft.net"
	<davem@...emloft.net>,
        "pabeni@...hat.com" <pabeni@...hat.com>,
        "edumazet@...gle.com" <edumazet@...gle.com>,
        Sunil Kovvuri Goutham
	<sgoutham@...vell.com>,
        Subbaraya Sundeep Bhatta <sbhatta@...vell.com>,
        Hariprasad Kelam <hkelam@...vell.com>
Subject: RE: [EXTERNAL] Re: [net-next PATCH v7 00/10] Introduce RVU
 representors



>-----Original Message-----
>From: Michal Swiatkowski <michal.swiatkowski@...ux.intel.com>
>Sent: Wednesday, July 3, 2024 4:14 PM
>To: Geethasowjanya Akula <gakula@...vell.com>
>Cc: netdev@...r.kernel.org; linux-kernel@...r.kernel.org; kuba@...nel.org;
>davem@...emloft.net; pabeni@...hat.com; edumazet@...gle.com; Sunil
>Kovvuri Goutham <sgoutham@...vell.com>; Subbaraya Sundeep Bhatta
><sbhatta@...vell.com>; Hariprasad Kelam <hkelam@...vell.com>
>Subject: [EXTERNAL] Re: [net-next PATCH v7 00/10] Introduce RVU representors
>On Fri, Jun 28, 2024 at 07:05:07PM +0530, Geetha sowjanya wrote:
>> This series adds representor support for each rvu devices.
>> When switchdev mode is enabled, representor netdev is registered for
>> each rvu device. In implementation of representor model, one NIX HW LF
>> with multiple SQ and RQ is reserved, where each RQ and SQ of the LF
>> are mapped to a representor. A loopback channel is reserved to support
>> packet path between representors and VFs.
>> CN10K silicon supports 2 types of MACs, RPM and SDP. This patch set
>> adds representor support for both RPM and SDP MAC interfaces.
>>
>> - Patch 1: Refactors and exports the shared service functions.
>> - Patch 2: Implements basic representor driver.
>> - Patch 3: Add devlink support to create representor netdevs that
>>   can be used to manage VFs.
>> - Patch 4: Implements basec netdev_ndo_ops.
>> - Patch 5: Installs tcam rules to route packets between representor and
>> 	   VFs.
>> - Patch 6: Enables fetching VF stats via representor interface
>> - Patch 7: Adds support to sync link state between representors and VFs .
>> - Patch 8: Enables configuring VF MTU via representor netdevs.
>> - Patch 9: Add representors for sdp MAC.
>> - Patch 10: Add devlink port support.
>>
>> Command to create VF representor
>> #devlink dev eswitch set pci/0002:1c:00.0 mode switchdev VF
>> representors are created for each VF when switch mode is set switchdev
>> on representor PCI device
>
>Does it mean that VFs needs to be created before going to switchdev mode? (in
>legacy mode). Keep in mind that in both mellanox and ice driver assume that
>VFs are created after chaning mode to switchdev (mode can't be changed if
>VFs).
No. RVU representor driver implementation is similar to mellanox and ice drivers. 
It assumes that VF gets created only after switchdev mode is enabled. 
Sorry, if above commit description is confusing. Will rewrite it.
  
>
>Different order can be problematic. For example (AFAIK) kubernetes scripts for
>switchdev assume that first is switching to switchdev and VFs creation is done
>after that.
>
>Thanks,
>Michal
>
>> # devlink dev eswitch set pci/0002:1c:00.0  mode switchdev # ip link
>> show
>> 25: r0p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode
>DEFAULT group default qlen 1000
>>     link/ether 32:0f:0f:f0:60:f1 brd ff:ff:ff:ff:ff:ff
>> 26: r1p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode
>DEFAULT group default qlen 1000
>>     link/ether 3e:5d:9a:4d:e7:7b brd ff:ff:ff:ff:ff:ff
>>
>> #devlink dev
>> pci/0002:01:00.0
>> pci/0002:02:00.0
>> pci/0002:03:00.0
>> pci/0002:04:00.0
>> pci/0002:05:00.0
>> pci/0002:06:00.0
>> pci/0002:07:00.0
>>
>> ~# devlink port
>> pci/0002:1c:00.0/0: type eth netdev r0p1v0 flavour pcipf controller 0
>> pfnum 1 vfnum 0 external false splittable false
>> pci/0002:1c:00.0/1: type eth netdev r1p1v1 flavour pcivf controller 0
>> pfnum 1 vfnum 1 external false splittable false
>> pci/0002:1c:00.0/2: type eth netdev r2p1v2 flavour pcivf controller 0
>> pfnum 1 vfnum 2 external false splittable false
>> pci/0002:1c:00.0/3: type eth netdev r3p1v3 flavour pcivf controller 0
>> pfnum 1 vfnum 3 external false splittable false
>>
>> -----------
>> v1-v2:
>>  -Fixed build warnings.
>>  -Address review comments provided by "Kalesh Anakkur Purayil".
>>
>> v2-v3:
>>  - Used extack for error messages.
>>  - As suggested reworked commit messages.
>>  - Fixed sparse warning.
>>
>> v3-v4:
>>  - Patch 2 & 3: Fixed coccinelle reported warnings.
>>  - Patch 10: Added devlink port support.
>>
>> v4-v5:
>>   - Patch 3: Removed devm_* usage in rvu_rep_create()
>>   - Patch 3: Fixed build warnings.
>>
>> v5-v6:
>>   - Addressed review comments provided by "Simon Horman".
>>   - Added review tag.
>>
>> v6-v7:
>>   - Rebased on top net-next branch.
>>
>> Geetha sowjanya (10):
>>   octeontx2-pf: Refactoring RVU driver
>>   octeontx2-pf: RVU representor driver
>>   octeontx2-pf: Create representor netdev
>>   octeontx2-pf: Add basic net_device_ops
>>   octeontx2-af: Add packet path between representor and VF
>>   octeontx2-pf: Get VF stats via representor
>>   octeontx2-pf: Add support to sync link state between representor and
>>     VFs
>>   octeontx2-pf: Configure VF mtu via representor
>>   octeontx2-pf: Add representors for sdp MAC
>>   octeontx2-pf: Add devlink port support
>>
>>  .../net/ethernet/marvell/octeontx2/Kconfig    |   8 +
>>  .../ethernet/marvell/octeontx2/af/Makefile    |   3 +-
>>  .../ethernet/marvell/octeontx2/af/common.h    |   2 +
>>  .../net/ethernet/marvell/octeontx2/af/mbox.h  |  74 ++
>>  .../net/ethernet/marvell/octeontx2/af/npc.h   |   1 +
>>  .../net/ethernet/marvell/octeontx2/af/rvu.c   |  11 +
>>  .../net/ethernet/marvell/octeontx2/af/rvu.h   |  30 +-
>>  .../marvell/octeontx2/af/rvu_debugfs.c        |  27 -
>>  .../marvell/octeontx2/af/rvu_devlink.c        |   6 +
>>  .../ethernet/marvell/octeontx2/af/rvu_nix.c   |  81 ++-
>>  .../marvell/octeontx2/af/rvu_npc_fs.c         |   5 +
>>  .../ethernet/marvell/octeontx2/af/rvu_reg.h   |   4 +
>>  .../ethernet/marvell/octeontx2/af/rvu_rep.c   | 464 ++++++++++++
>>  .../marvell/octeontx2/af/rvu_struct.h         |  26 +
>>  .../marvell/octeontx2/af/rvu_switch.c         |  20 +-
>>  .../ethernet/marvell/octeontx2/nic/Makefile   |   2 +
>>  .../ethernet/marvell/octeontx2/nic/cn10k.c    |   4 +-
>>  .../ethernet/marvell/octeontx2/nic/cn10k.h    |   2 +-
>>  .../marvell/octeontx2/nic/otx2_common.c       |  56 +-
>>  .../marvell/octeontx2/nic/otx2_common.h       |  84 ++-
>>  .../marvell/octeontx2/nic/otx2_devlink.c      |  49 ++
>>  .../ethernet/marvell/octeontx2/nic/otx2_pf.c  | 305 +++++---
>>  .../marvell/octeontx2/nic/otx2_txrx.c         |  38 +-
>>  .../marvell/octeontx2/nic/otx2_txrx.h         |   3 +-
>>  .../ethernet/marvell/octeontx2/nic/otx2_vf.c  |  19 +-
>> .../net/ethernet/marvell/octeontx2/nic/rep.c  | 684 ++++++++++++++++++
>> .../net/ethernet/marvell/octeontx2/nic/rep.h  |  53 ++
>>  27 files changed, 1834 insertions(+), 227 deletions(-)  create mode
>> 100644 drivers/net/ethernet/marvell/octeontx2/af/rvu_rep.c
>>  create mode 100644 drivers/net/ethernet/marvell/octeontx2/nic/rep.c
>>  create mode 100644 drivers/net/ethernet/marvell/octeontx2/nic/rep.h
>>
>> --
>> 2.25.1
>>

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ