netdev - Re: [PATCH 3/3] can: flexcan: handle S32G2/S32G3 separate interrupt lines

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20241120-rational-chocolate-marten-70ed52-mkl@pengutronix.de>
Date: Wed, 20 Nov 2024 11:54:03 +0100
From: Marc Kleine-Budde <mkl@...gutronix.de>
To: Ciprian Marian Costea <ciprianmarian.costea@....nxp.com>
Cc: Vincent Mailhol <mailhol.vincent@...adoo.fr>, 
	Andrew Lunn <andrew+netdev@...n.ch>, "David S . Miller" <davem@...emloft.net>, 
	Eric Dumazet <edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>, 
	Paolo Abeni <pabeni@...hat.com>, Rob Herring <robh@...nel.org>, 
	Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>, linux-can@...r.kernel.org, 
	netdev@...r.kernel.org, devicetree@...r.kernel.org, linux-kernel@...r.kernel.org, 
	imx@...ts.linux.dev, NXP Linux Team <s32@....com>, 
	Christophe Lizzi <clizzi@...hat.com>, Alberto Ruiz <aruizrui@...hat.com>, 
	Enric Balletbo <eballetb@...hat.com>
Subject: Re: [PATCH 3/3] can: flexcan: handle S32G2/S32G3 separate interrupt
 lines

On 20.11.2024 12:47:02, Ciprian Marian Costea wrote:
> > > > > The mainline driver already handles the 2nd mailbox range (same
> > > > > 'flexcan_irq') is used. The only difference is that for the 2nd mailbox
> > > > > range a separate interrupt line is used.
> > > > 
> > > > AFAICS the IP core supports up to 128 mailboxes, though the driver only
> > > > supports 64 mailboxes. Which mailboxes do you mean by the "2nd mailbox
> > > > range"? What about mailboxes 64..127, which IRQ will them?
> > > 
> > > On S32G the following is the mapping between FlexCAN IRQs and mailboxes:
> > > - IRQ line X -> Mailboxes 0-7
> > > - IRQ line Y -> Mailboxes 8-127 (Logical OR of Message Buffer Interrupt
> > > lines 127 to 8)
> > > 
> > > By 2nd range, I was refering to Mailboxes 8-127.
> > 
> > Interesting, do you know why it's not symmetrical (0...63, 64...127)?
> > Can you point me to the documentation.
> 
> Unfortunately I do not know why such hardware integration decisions have
> been made.
> 
> Documentation for S32G3 SoC can be found on the official NXP website,
> here:
> https://www.nxp.com/products/processors-and-microcontrollers/s32-automotive-platform/s32g-vehicle-network-processors/s32g3-processors-for-vehicle-networking:S32G3
> 
> But please note that you need to setup an account beforehand.

I have that already, where is the mailbox to IRQ mapping described?

regards,
Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde          |
Embedded Linux                   | https://www.pengutronix.de |
Vertretung Nürnberg              | Phone: +49-5121-206917-129 |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-9   |

Download attachment "signature.asc" of type "application/pgp-signature" (489 bytes)