netdev - RE: [PATCH v2 3/3] arm64: dts: renesas: rzg3e-smarc-som: Enable eth{0-1} (GBETH) interfaces

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID:
 <OSCPR01MB146474526AD10BFCF587A8F85FF7DA@OSCPR01MB14647.jpnprd01.prod.outlook.com>
Date: Thu, 19 Jun 2025 11:09:49 +0000
From: John Madieu <john.madieu.xa@...renesas.com>
To: "Lad, Prabhakar" <prabhakar.csengg@...il.com>
CC: "andrew+netdev@...n.ch" <andrew+netdev@...n.ch>, "conor+dt@...nel.org"
	<conor+dt@...nel.org>, "davem@...emloft.net" <davem@...emloft.net>,
	"edumazet@...gle.com" <edumazet@...gle.com>, "geert+renesas@...der.be"
	<geert+renesas@...der.be>, "krzk+dt@...nel.org" <krzk+dt@...nel.org>,
	"kuba@...nel.org" <kuba@...nel.org>, "pabeni@...hat.com" <pabeni@...hat.com>,
	Prabhakar Mahadev Lad <prabhakar.mahadev-lad.rj@...renesas.com>,
	"robh@...nel.org" <robh@...nel.org>, Biju Das <biju.das.jz@...renesas.com>,
	"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
	"john.madieu@...il.com" <john.madieu@...il.com>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
	"linux-renesas-soc@...r.kernel.org" <linux-renesas-soc@...r.kernel.org>,
	"magnus.damm@...il.com" <magnus.damm@...il.com>, "netdev@...r.kernel.org"
	<netdev@...r.kernel.org>
Subject: RE: [PATCH v2 3/3] arm64: dts: renesas: rzg3e-smarc-som: Enable
 eth{0-1} (GBETH) interfaces

Hi Prabhakar,

> -----Original Message-----
> From: Lad, Prabhakar <prabhakar.csengg@...il.com>
> Sent: Thursday, June 19, 2025 11:00 AM
> To: John Madieu <john.madieu.xa@...renesas.com>
> Subject: Re: [PATCH v2 3/3] arm64: dts: renesas: rzg3e-smarc-som: Enable
> eth{0-1} (GBETH) interfaces
> 
> Hi John,
> 
> Thank you for the patch.
> 
> On Wed, Jun 11, 2025 at 7:20 AM John Madieu
> <john.madieu.xa@...renesas.com> wrote:
> >
> > Enable the Gigabit Ethernet Interfaces (GBETH) populated on the RZ/G3E
> > SMARC EVK
> >
> > Reviewed-by: Biju Das <biju.das.jz@...renesas.com>
> > Tested-by: Biju Das <biju.das.jz@...renesas.com>
> > Signed-off-by: John Madieu <john.madieu.xa@...renesas.com>
> > ---
> >  .../boot/dts/renesas/rzg3e-smarc-som.dtsi     | 106 ++++++++++++++++++
> >  1 file changed, 106 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/renesas/rzg3e-smarc-som.dtsi
> > b/arch/arm64/boot/dts/renesas/rzg3e-smarc-som.dtsi
> > index f99a09d04ddd..4b4c7f3381ad 100644
> > --- a/arch/arm64/boot/dts/renesas/rzg3e-smarc-som.dtsi
> > +++ b/arch/arm64/boot/dts/renesas/rzg3e-smarc-som.dtsi
> > @@ -26,6 +26,8 @@ / {
> >         compatible = "renesas,rzg3e-smarcm", "renesas,r9a09g047e57",
> > "renesas,r9a09g047";
> >
> >         aliases {
> > +               ethernet0 = &eth0;
> > +               ethernet1 = &eth1;
> >                 i2c2 = &i2c2;
> >                 mmc0 = &sdhi0;
> >                 mmc2 = &sdhi2;
> > @@ -77,6 +79,74 @@ &audio_extal_clk {
> >         clock-frequency = <48000000>;
> >  };
> >
> > +&eth0 {
> > +       phy-handle = <&phy0>;
> > +       phy-mode = "rgmii-id";
> > +
> > +       pinctrl-0 = <&eth0_pins>;
> > +       pinctrl-names = "default";
> > +       status = "okay";
> > +
> > +       mdio {
> > +               #address-cells = <1>;
> > +               #size-cells = <0>;
> > +               compatible = "snps,dwmac-mdio";
> > +
> > +               phy0: ethernet-phy@7 {
> > +                       compatible = "ethernet-phy-id0022.1640",
> > +                                    "ethernet-phy-ieee802.3-c22";
> > +                       reg = <7>;
> > +                       interrupts-extended = <&icu 3
> IRQ_TYPE_LEVEL_LOW>;
> > +                       rxc-skew-psec = <1400>;
> > +                       txc-skew-psec = <1400>;
> > +                       rxdv-skew-psec = <0>;
> > +                       txdv-skew-psec = <0>;
> > +                       rxd0-skew-psec = <0>;
> > +                       rxd1-skew-psec = <0>;
> > +                       rxd2-skew-psec = <0>;
> > +                       rxd3-skew-psec = <0>;
> > +                       txd0-skew-psec = <0>;
> > +                       txd1-skew-psec = <0>;
> > +                       txd2-skew-psec = <0>;
> > +                       txd3-skew-psec = <0>;
> > +               };
> > +       };
> > +};
> > +
> > +&eth1 {
> > +       phy-handle = <&phy1>;
> > +       phy-mode = "rgmii-id";
> > +
> > +       pinctrl-0 = <&eth1_pins>;
> > +       pinctrl-names = "default";
> > +       status = "okay";
> > +
> > +       mdio {
> > +               #address-cells = <1>;
> > +               #size-cells = <0>;
> > +               compatible = "snps,dwmac-mdio";
> > +
> > +               phy1: ethernet-phy@7 {
> > +                       compatible = "ethernet-phy-id0022.1640",
> > +                                    "ethernet-phy-ieee802.3-c22";
> > +                       reg = <7>;
> > +                       interrupts-extended = <&icu 16
> IRQ_TYPE_LEVEL_LOW>;
> > +                       rxc-skew-psec = <1400>;
> > +                       txc-skew-psec = <1400>;
> > +                       rxdv-skew-psec = <0>;
> > +                       txdv-skew-psec = <0>;
> > +                       rxd0-skew-psec = <0>;
> > +                       rxd1-skew-psec = <0>;
> > +                       rxd2-skew-psec = <0>;
> > +                       rxd3-skew-psec = <0>;
> > +                       txd0-skew-psec = <0>;
> > +                       txd1-skew-psec = <0>;
> > +                       txd2-skew-psec = <0>;
> > +                       txd3-skew-psec = <0>;
> > +               };
> > +       };
> > +};
> > +
> >  &gpu {
> >         status = "okay";
> >         mali-supply = <&reg_vdd0p8v_others>; @@ -103,6 +173,42 @@
> > raa215300: pmic@12 {  };
> >
> >  &pinctrl {
> > +       eth0_pins: eth0 {
> > +               pinmux = <RZG3E_PORT_PINMUX(A, 1, 1)>, /* MDC */
> > +                        <RZG3E_PORT_PINMUX(A, 0, 1)>, /* MDIO */
> > +                        <RZG3E_PORT_PINMUX(C, 2, 15)>, /* PHY_INTR
> (IRQ2) */
> > +                        <RZG3E_PORT_PINMUX(C, 1, 1)>, /* RXD3 */
> > +                        <RZG3E_PORT_PINMUX(C, 0, 1)>, /* RXD2 */
> > +                        <RZG3E_PORT_PINMUX(B, 7, 1)>, /* RXD1 */
> > +                        <RZG3E_PORT_PINMUX(B, 6, 1)>, /* RXD0 */
> > +                        <RZG3E_PORT_PINMUX(B, 0, 1)>, /* RXC */
> > +                        <RZG3E_PORT_PINMUX(A, 2, 1)>, /* RX_CTL */
> > +                        <RZG3E_PORT_PINMUX(B, 5, 1)>, /* TXD3 */
> > +                        <RZG3E_PORT_PINMUX(B, 4, 1)>, /* TXD2 */
> > +                        <RZG3E_PORT_PINMUX(B, 3, 1)>, /* TXD1 */
> > +                        <RZG3E_PORT_PINMUX(B, 2, 1)>, /* TXD0 */
> > +                        <RZG3E_PORT_PINMUX(B, 1, 1)>, /* TXC */
> > +                        <RZG3E_PORT_PINMUX(A, 3, 1)>; /* TX_CTL */
> like RZ/V2H on RZ/G3E PFC_OEN BITS(0,1) need to be configured based on
> RGMII/MII mode?

Yes, it is the case. OEN1 and OEN0.

> 
> Cheers,
> Prabhakar

Regards,
John

> 
> > +       };
> > +
> > +       eth1_pins: eth1 {
> > +               pinmux = <RZG3E_PORT_PINMUX(D, 1, 1)>, /* MDC */
> > +                        <RZG3E_PORT_PINMUX(D, 0, 1)>, /* MDIO */
> > +                        <RZG3E_PORT_PINMUX(F, 2, 15)>, /* PHY_INTR
> (IRQ15) */
> > +                        <RZG3E_PORT_PINMUX(F, 1, 1)>, /* RXD3 */
> > +                        <RZG3E_PORT_PINMUX(F, 0, 1)>, /* RXD2 */
> > +                        <RZG3E_PORT_PINMUX(E, 7, 1)>, /* RXD1 */
> > +                        <RZG3E_PORT_PINMUX(E, 6, 1)>, /* RXD0 */
> > +                        <RZG3E_PORT_PINMUX(E, 0, 1)>, /* RXC */
> > +                        <RZG3E_PORT_PINMUX(D, 2, 1)>, /* RX_CTL */
> > +                        <RZG3E_PORT_PINMUX(E, 5, 1)>, /* TXD3 */
> > +                        <RZG3E_PORT_PINMUX(E, 4, 1)>, /* TXD2 */
> > +                        <RZG3E_PORT_PINMUX(E, 3, 1)>, /* TXD1 */
> > +                        <RZG3E_PORT_PINMUX(E, 2, 1)>, /* TXD0 */
> > +                        <RZG3E_PORT_PINMUX(E, 1, 1)>, /* TXC */
> > +                        <RZG3E_PORT_PINMUX(D, 3, 1)>; /* TX_CTL */
> > +       };
> > +
> >         i2c2_pins: i2c {
> >                 pinmux = <RZG3E_PORT_PINMUX(3, 4, 1)>, /* SCL2 */
> >                          <RZG3E_PORT_PINMUX(3, 5, 1)>; /* SDA2 */
> > --
> > 2.25.1
> >
> >