lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <956e2244-a95e-4c5e-a4a3-fb694c124739@enneenne.com>
Date: Wed, 26 Jun 2024 16:16:17 +0200
From: Rodolfo Giometti <giometti@...eenne.com>
To: Bastien Curutchet <bastien.curutchet@...tlin.com>
Cc: linux-kernel@...r.kernel.org,
 Thomas Petazzoni <thomas.petazzoni@...tlin.com>, herve.codina@...tlin.com,
 christophercordahi@...ometrics.ca,
 Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
 Andrew Morton <akpm@...ux-foundation.org>
Subject: Re: [PATCH v3 1/1] pps: clients: gpio: Bypass edge's direction check
 when not needed

On 26/06/24 14:55, Bastien Curutchet wrote:
> Hi Rodolfo
> 
> On 4/25/24 14:42, Rodolfo Giometti wrote:
>> On 25/04/24 14:28, Bastien Curutchet wrote:
>>> In the IRQ handler, the GPIO's state is read to verify the direction of
>>> the edge that triggered the interruption before generating the PPS event.
>>> If a pulse is too short, the GPIO line can reach back its original state
>>> before this verification and the PPS event is lost.
>>>
>>> This check is needed when info->capture_clear is set because it needs
>>> interruptions on both rising and falling edges. When info->capture_clear
>>> is not set, interruption is triggered by one edge only so this check can
>>> be omitted.
>>>
>>> Add a warning if irq_handler is left without triggering any PPS event.
>>> Bypass the edge's direction verification when info->capture_clear is not
>>> set.
>>>
>>> Signed-off-by: Bastien Curutchet <bastien.curutchet@...tlin.com>
>>
>> Acked-by: Rodolfo Giometti <giometti@...eenne.com>
>>
> 
> I don't think I've received any updates since you acked this. Is there something 
> missing before the patch can be applied?

No updates. It can be applied.

Ciao,

Rodolfo

-- 
GNU/Linux Solutions                  e-mail: giometti@...eenne.com
Linux Device Driver                          giometti@...ux.it
Embedded Systems                     phone:  +39 349 2432127
UNIX programming


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ