lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <fd4c81a5-3b99-448c-92d4-9465f0e76db3@linaro.org>
Date: Mon, 8 Sep 2025 14:16:17 +0200
From: Daniel Lezcano <daniel.lezcano@...aro.org>
To: David Lechner <dlechner@...libre.com>, Nuno Sá
 <noname.nuno@...il.com>, jic23@...nel.org, nuno.sa@...log.com,
 andy@...nel.org, robh@...nel.org, conor+dt@...nel.org, krzk+dt@...nel.org
Cc: linux-iio@...r.kernel.org, s32@....com, linux-kernel@...r.kernel.org,
 devicetree@...r.kernel.org, chester62515@...il.com, mbrugger@...e.com,
 ghennadi.procopciuc@....nxp.com
Subject: Re: [PATCH v1 2/2] iio: adc: Add the NXP SAR ADC support for the
 s32g2/3 platforms

On 05/09/2025 23:54, David Lechner wrote:
> On 9/5/25 3:58 PM, Daniel Lezcano wrote:
>> On 05/09/2025 17:25, David Lechner wrote:
>>> On 9/5/25 4:44 AM, Daniel Lezcano wrote:
>>>> On 04/09/2025 19:49, David Lechner wrote:
>>>>> On 9/4/25 12:40 PM, Daniel Lezcano wrote:
>>
>> [ ... ]
>>
>>> Taking a step back, what sort of real-world uses cases do you need to support?
>>> Or are you just trying to implement everything that the ADC can do? The latter
>>> can be a bit risky because you might end making something where you can't do
>>> a buffered read and a single channel read at the same time, but later find out
>>> you have a real-world application that needs to do this.
>>>
>>> It looks like it would be possible to implement buffered reads in lots of ways.
>>> IIO devices can have more than one buffer per device so we can add more in the
>>> future if we need to. So I would just drop the DMA part of the implementation
>>> for now and implement the basic triggered buffer using MCR[NSTART] and ECH
>>> (End of Chain) interrupt request and just reading data from the ICDR registers.
>>>
>>> I would wait to have a real-world application that requires DMA to decide the
>>> best way to implement that. There are lots of possibilities, like does it need
>>> an external trigger or is continuous mode good enough? Does it need to be cyclic
>>> (something the IIO subsystem doesn't really support yet) or not. Is exact sample
>>> timing important or do we just need a big buffer? These questions we can't
>>> really answer without a specific application to use it.
>>
>> In the case of this IP, the use cases are in the automotive context. The system running on the APU is supposed to monitor at high rate (or not) the different channels which can be connected to any device the integrator choose to use.
>>
>> For this reason, the driver should be able to support the different modes because the integrator of the car computer can decide to monitor the devices connected to the different channels differently.
>>
>> Said differently, we need these modes because the capture depends on what the integrator decide to connect to the different channels.
> ...
>> We just know all these use cases exist.


The submitted driver supports the three modes.

Nuno asked to use the IIO dma engine API.

However there is few information and examples with the API and I failed 
to use the devm_iio_dmaengine_buffer_setup_with_handle() function.

AFAICT, devm_iio_dmaengine_buffer_setup_ext() can not be used because 
dma_slave_config() is not called, thus the src_addr is not set.

Is there any example somewhere, documentation or guidance to use the API?

Thanks

   -- Daniel


-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ