linux-kernel - Re: [PATCH v7 3/3] PCI: imx6: Add external reference clock input mode support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <c524y4ymsozmktpptjrpkav62yykrqztyx4hkrgmbmbrewxio2@bczi3zufjede>
Date: Sat, 20 Sep 2025 13:07:09 +0530
From: Manivannan Sadhasivam <mani@...nel.org>
To: Richard Zhu <hongxing.zhu@....com>
Cc: frank.li@....com, l.stach@...gutronix.de, lpieralisi@...nel.org, 
	kwilczynski@...nel.org, robh@...nel.org, krzk+dt@...nel.org, conor+dt@...nel.org, 
	bhelgaas@...gle.com, shawnguo@...nel.org, s.hauer@...gutronix.de, 
	kernel@...gutronix.de, festevam@...il.com, linux-pci@...r.kernel.org, 
	linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org, imx@...ts.linux.dev, 
	linux-kernel@...r.kernel.org
Subject: Re: [PATCH v7 3/3] PCI: imx6: Add external reference clock input
 mode support

On Thu, Sep 18, 2025 at 11:25:55AM +0800, Richard Zhu wrote:
> i.MX95 PCIes have two reference clock inputs: one from internal PLL, the
> other from off chip crystal oscillator. The "extref" clock refers to a
> reference clock from an external crystal oscillator.
> 
> Add external reference clock input mode support for i.MX95 PCIes.
> 
> Signed-off-by: Richard Zhu <hongxing.zhu@....com>
> Reviewed-by: Frank Li <Frank.Li@....com>
> ---
>  drivers/pci/controller/dwc/pci-imx6.c | 20 +++++++++++++-------
>  1 file changed, 13 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
> index 80e48746bbaf..e2ca8b036253 100644
> --- a/drivers/pci/controller/dwc/pci-imx6.c
> +++ b/drivers/pci/controller/dwc/pci-imx6.c
> @@ -149,6 +149,7 @@ struct imx_pcie {
>  	struct gpio_desc	*reset_gpiod;
>  	struct clk_bulk_data	*clks;
>  	int			num_clks;
> +	bool			enable_ext_refclk;
>  	struct regmap		*iomuxc_gpr;
>  	u16			msi_ctrl;
>  	u32			controller_id;
> @@ -241,6 +242,8 @@ static unsigned int imx_pcie_grp_offset(const struct imx_pcie *imx_pcie)
>  
>  static int imx95_pcie_init_phy(struct imx_pcie *imx_pcie)
>  {
> +	bool ext = imx_pcie->enable_ext_refclk;
> +
>  	/*
>  	 * ERR051624: The Controller Without Vaux Cannot Exit L23 Ready
>  	 * Through Beacon or PERST# De-assertion
> @@ -259,13 +262,12 @@ static int imx95_pcie_init_phy(struct imx_pcie *imx_pcie)
>  			IMX95_PCIE_PHY_CR_PARA_SEL,
>  			IMX95_PCIE_PHY_CR_PARA_SEL);
>  
> -	regmap_update_bits(imx_pcie->iomuxc_gpr,
> -			   IMX95_PCIE_PHY_GEN_CTRL,
> -			   IMX95_PCIE_REF_USE_PAD, 0);
> -	regmap_update_bits(imx_pcie->iomuxc_gpr,
> -			   IMX95_PCIE_SS_RW_REG_0,
> +	regmap_update_bits(imx_pcie->iomuxc_gpr, IMX95_PCIE_PHY_GEN_CTRL,
> +			   ext ? IMX95_PCIE_REF_USE_PAD : 0,
> +			   IMX95_PCIE_REF_USE_PAD);
> +	regmap_update_bits(imx_pcie->iomuxc_gpr, IMX95_PCIE_SS_RW_REG_0,
>  			   IMX95_PCIE_REF_CLKEN,
> -			   IMX95_PCIE_REF_CLKEN);
> +			   ext ? 0 : IMX95_PCIE_REF_CLKEN);
>  
>  	return 0;
>  }
> @@ -1606,7 +1608,7 @@ static int imx_pcie_probe(struct platform_device *pdev)
>  	struct imx_pcie *imx_pcie;
>  	struct device_node *np;
>  	struct device_node *node = dev->of_node;
> -	int ret, domain;
> +	int i, ret, domain;
>  	u16 val;
>  
>  	imx_pcie = devm_kzalloc(dev, sizeof(*imx_pcie), GFP_KERNEL);
> @@ -1657,6 +1659,10 @@ static int imx_pcie_probe(struct platform_device *pdev)
>  	if (imx_pcie->num_clks < 0)
>  		return dev_err_probe(dev, imx_pcie->num_clks,
>  				     "failed to get clocks\n");
> +	imx_pcie->enable_ext_refclk = false;

Default value is 'false'. So no need to initialize.

- Mani

-- 
மணிவண்ணன் சதாசிவம்