[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <b87d0c82-b8b7-4e14-85c3-c4ba88aa4000@lunn.ch>
Date: Wed, 21 Jan 2026 13:55:57 +0100
From: Andrew Lunn <andrew@...n.ch>
To: Chaoyi Chen <kernel@...kyi.com>
Cc: Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Heiko Stuebner <heiko@...ech.de>,
Alexey Charkov <alchark@...il.com>,
Shawn Lin <shawn.lin@...k-chips.com>,
Sebastian Reichel <sebastian.reichel@...labora.com>,
Chaoyi Chen <chaoyi.chen@...k-chips.com>,
Andy Yan <andy.yan@...k-chips.com>,
Nicolas Frattaroli <nicolas.frattaroli@...labora.com>,
Detlev Casanova <detlev.casanova@...labora.com>,
Stephen Chen <stephen@...xa.com>, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-rockchip@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 1/3] arm64: dts: rockchip: Change gmac phy-mode to
rgmii-id for rk3576 evb1
> @@ -721,6 +719,7 @@ rgmii_phy0: ethernet-phy@1 {
> reset-assert-us = <20000>;
> reset-deassert-us = <100000>;
> reset-gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>;
> + tx-internal-delay-ps = <1950>;
The PHY should add 2000ps, as required by the RGMII standard. The
difference is so small there is no need for tx-internal-delay.
In most cases, 'rmgii-id' should be sufficient, unless the PCB is
badly designed.
Andrew
Powered by blists - more mailing lists